speedman

Id agree true jdm co that still makes real low offset wheels not those cheep 500.00 for a set with tire ones.....

Im enterestid in struts also, but more into a set that tubes are bent only need 6'' of tube & rest of assebly spindel,roter ect... caliboricua@aol.com

hay scott this is eric, is the w58 open or closed if its closed im interestid . im the guy with the u67 head i need a closed one for my 2.2 ill call u tomarrow.

i have one i use to race with ill pull out tomarow its biger then 1.25 ints not mukuni if i remember dats comp ? ill post tomarow

I will check tomarow (daylight)en post i have 2 blocks l20b but well see if the same......

thank u for the responces, it was a junk yard motor out of a 200sx 74-76 dont remember, it had a dogleg mated to it.i just puled motor and tranny both were clean. yes i will take pics when i pull it.

Im going tomarrow ill let u know

Hay all u of the ratsun, i need some help identifying a n53 number on head.i havent puled it yet,so i dont know what to expect.basicly i would like to know if it is a nother plain jaine head or maby somthing moe usefull.i havent heard of this one so some one learn me somthing new it is on a 2.0b,with stock cam, just a b stamped on end.

Ha why stock. a 32/36 weber is plenty good over stock.i have also pm me if u want one.

If u are going to use the fan ase a pusher (in front of radiator)check the hight of fan .There is not much room between the brace and radator. i have a 10" dose its job.

i have a bubble flare im runing 15/8.5 -8 and still have room. :D

Ha are u going to S D O for monthly meet this friday. if so see ya there.have questions.

ha if u mean 510 iv got one. in the east bay .