Jump to content

picotte21

New Members
  • Posts

    13
  • Joined

  • Last visited

About picotte21

  • Birthday 11/12/1988

Profile Information

  • Location
    Boise ID
  • Cars
    78 620, 95 A3 jetta, 87 gsxr 7/11
  • Occupation
    Aircraft

picotte21's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. i'm in boise ID can drive a couple hundred miles to pick them up not one salvage yard has a 620 in it around here
  2. the only reason i replaced the l20b was that i'm a cheap ass. the motor seized up and i didn't want to pay for the parts to rebuild it. (plus i'm married with children if that explains something) the z24 was free so i used it instead
  3. thanks for the kudos it is a z24 we used a drill and a die grinder to open up the hole it was cheaper than buying an electric fuel pump and worked really well. the ignition was a pain to figure out how to make both the coils fire but when we figured it out it ran like a top
  4. when we picked up this truck the stock exhaust was rotted out and we just had some tubing lying around that worked perfect for a side pipe wasn't planned just happened that way we originally wanted to run it out the back and use c5 corvette tips in the center. the 720 cable wasn't even close i think we got the cable from a conquest or dodge caravan i cant remember. its running dual plugs all the time. its a ton quicker than the L20b spins the tires through 3rd when you want it too
  5. thats the water temp gauge. ya thats a side pipe it might change here soon its a little loud right now. the buckets in it are from a 2nd gen 300z but they're a little big for my tall frame so i'm replacing them with smaller buckets from a 83 rx7. i might go really disco with the interior (red shag) but i dont know yet. i'm taking pictures of it tomorrow with my good camera so stay tuned.
  6. here is one of the engine crappy cell pics i know
  7. hi guys i'm new to this forum and just thought i'd say hi and show you guys what i got 78 620 longbed swapped a dual plug engine and 5 speed from a newer dat into it a buddy and i did all the body work and paint its a fade proof suede black. my goal is to bag the rear end and finish the interior but for now this is it tell me what you guys think i'll try to get some higher res pics of it when i get the chance
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.