Jason Wright

Hmmmmm....may stay like I am then. Anyone know of a available lsd diff for the 720?

It's a strong engine. Lots of low end torque. Will lay rubber 1st and 2nd, and chirp 3rd. I can pull off from a stand still in second gear.

New pistons to Match bore. Dished.

Pretty much stock lower end. Was rebuilt at a local machine shop. Crank and rods turned 20 / 20. Bored .040 blocked decked.

Same dished pistons.but the blocked was decked.

So a turbo would be kinda pointless huh?

Oh. I did. I have a comp 268 in it.

I have a built z24. Bored .40, ported head, ported intake, weber 32/36 weber carb and pacesetter headers. Looking for a little bit more. Will the weber handle a blow through setup? Maybe 5-10 psi?

I got it as clean as I could. Im working with bare minimum. I had to take a lot of stuff to my job to prep.

I got it as clean as I could. Im working with bare minimum. I had to take a lot of stuff to my job to prep.

Sure mike.

Do the offer a posi diff for it? That she likes to light up the right rear tire. Lol.

If I drive It normally, I get about 20 mpg.

The torque is amazing! She will lay rubber in 1st, 2nd, and 3rd gear. Not sure what size gear is in it but at 70 Mph she turning 3k rpm.