Jump to content


sebpv

Member Since 24 Oct 2013
Offline Last Active Today, 11:30 AM
*----

Posts I've Made

In Topic: QUARTER PANELS

12 December 2017 - 11:23 AM

Post a wanted ads in the classifieds. You might get your answer

In Topic: 72 620 barn find

12 December 2017 - 07:35 AM

I meant the interior panels of the rockers. Look up my thread and you will see how I fixed them. Though if you need to replace the rockers, I strongly suggestyou simply undo all the rockers at the spot welds and completely replace the interior panels as well. Under cab mounts are a future project

In Topic: 72 620 barn find

11 December 2017 - 10:24 PM

if your cab mounts are rusted through, expect the side panel to be as well. I redid all 4 of mine and it was a pain!

In Topic: 73 620 with matchbox distributor misses at high idle

11 December 2017 - 12:52 PM

Many problems with what you're saying:
First, I assume that you actually have a L16 engine with, dual point dizzy?
If so:
-only use engine matching coil, i.e L16
-inspect the condition of the points
-use a feeler gauge and check for correct distance
-check the dizzy cap contacts
-check you spark plugs and make sure they are within spec
-check your ballast resistor for correct resistance
If you actually have the matchbox:
-cant help you but Im sure there are similar checkups you can do

In Topic: Trucky-chan KA-T 620 project

11 December 2017 - 12:42 PM

This is one place I would attempt with patch panel ciment