leifi

Would be great if I still could by this from Nissan! I have checked that this "dogleg" is no longer available at Nissan in Europe, but might still be available in US. Any suggestions to me, regarding Nissan shop I could contact to ask for this?? If not, still interested in rustfree cutouts from donor car!

I am located in Norway, so metal piece must be shipped here. There is few 510 left here, and much rust involved. (I picked up my 240Z in California, to find one with little rust). I have new sills for my 510, made locally.The problem is the arch lip from the end of sill and approx 12-15cm up above top of sill.

Hello,thanks for your responses! I have updated the title of topic, hoping it descibes better now what I am looking for :-) Yenpit described it: "where the wheel arch lip rolls down into the trailing end of the sill/rocker panel." I will see if I can upload a picture..

Hello! During replacement of the sills of my 510( have had it for 18years) i found rust 20cm up along rear wheel arch, on left side. Would like to buy a rust free piece for this, if someone have a donor car to cut from! I can send pictures of area, if needed. MUST be rustfree! Appreciate respons, still hoping that the car can be fixed...:-) Regards Leif email:leif@hesbynett.no

I have corrected first post, only needing the pedestal, I have the timing plate.

Anyone having a spare pedestal for my dizzy? Will paypal for pedestal incl shipping. Thanks, -Leif-

I live in Norway, so will need the pedestal shipped to me here. I dont know for sure what car the distributor is from, I bought it on ebay from California, the advertise said it was for pickup 720 and 620. Any way I can tell by looking at it? I have another one, complete D4k8-08(same number) that I just bought, they look exactly the same besides on the last one, the bolt holes on timing plate ar slotted so you can twist it of the bolts. And the one I need pedestal for has plastic bushing in lower end, the other one is metal. I just found that I infact have the timing plate, so only pedestal is needed! I dont know if complete id-number can tell anything, but it is D4K8-08 0403, followed by 22100 B9802(this is the same number on both) Thanks for comments! :-)

Hello! I am missing the pedestal on my matchbox distributor D4K8-08. Would be great if someone can sell these parts for me! I know there is differences in pedestals, do not know which will fit, but atleast pedestal from another D4K8-08 will fit. Thanks, Leif 02.11. Updated text, since I found that I have the timing plate, and only need pedestal!