wht620

hi motavated I have a 75 620 w/kin pins as well and i will like to do the same thing that u have done to your front suspension w/the disc break and upper and lower bal joins.Can u tell what did u use for the update? like model of the vehicule calipers etc...please, any help will be very apreciate.

hi i need a bench seat & steering box assembly for my 75 620 in the colorado area or possibly someone to ship at least an sttering box assembly to 80498 please, e-mail me w/any info if someone has any or possible place to find this parts

will this steering box fit my truck? and how much do you want for it?,it is complete?

idler arm is been replaced. o Paul i have adjuted the steering box already,what i mean to say,about hydroplane is kindad similar but in dry weather steering? I guess i shoul try different tires and wheels too.

the front end is been replaced compleatly brand new,shocks,tide rods,bushins,etc... im using 18'' titan wheels with 225/40/18 in the front & 245/40/18 in the rear,the steering box is been adjusted to the max & i still having quite a bit of play. Alignment is been done as well,is just when i move to a different lane in the high way it has the tendency to hydroplane,(like going out of my control)i dont know if it is because of the tires? too wide. It should still feel tider anyway? w/new suspenssion. the only thing to be replace or to try is a different steering box.

hi everyone, im looking for an steering box assembly for my 1975 620 in good working condition ASAP please, im in colorado

did anybody figure it out what cables can be use w/beebanis rear disc brake conversion for the e-brake, on the 620 reg cab? my stock cables are way too short,about 1-1/2 feet. Any ideas on how to make this work?.

hi denveratsun, which local J.Y did u found datsun parts im local, from the rocky mountains and im having a hard time to find parts for my truck as well(620)any info will help me alot :) so i can have my truck running.

pm sent

they'r no my friends,but when i took my parts to them,they told me, up front that they were no responsible for any damages that may occur and i took the risk :(

i still need some rear axles for my truck anybody.

how much for the rear axles ship to 80498?

i have install the axles back in the truck and they do vibrate alot,drove it around the block,no bueno,so anybody im in need of rear axles at least the left side behind driver side is the worst one help please :(

hi bob,what kind of side mirrors and wheels are you using on the blue truck? very nizeeee!! truck

i have new bearings & seals,not install yet,the bend part is about 1/8"just around the wheel studs are located,when a turn the shafts by hand on a flat surface (table)i can see where the damage is.Maybe ill try them fisrt and see what happens?