clutch810

hey dude i still need that aircleaner how much is the shipping to fresno california?

i need an air cleaner assembly for a '78 620 got any?

I need an aircleaner for a california 78 620 pick up. it need to pass smog soooon. like by 9-8-09 or i have to give it to the junk yard. this is my final piece to my puzzle truck. any help would be great Clutch

I got my 620 running today and was able to drive her around the parking lot. ive never that big of a smile on my face in a long time. my girlfriend got a little jealous. i need an air cleaner does anyone have one for a 78 620 california model, ive looked around all week i cant find one

is there an intank one?

it was a FI mighty max and it'll shoot a 40foot stream of gas. ha would a regulator work for it?

so my friend gave me a a gas tank out of a mighty max with an intank fuel pump... it works i dont care. i just want the truck to run. now i have the problem of too much gas being pumped in. any ideas on how to fix this. i need to have it running before school starts in sept, or my parents are going to have it towed out of here. i dont want to lose this great project. its opened my eyes to other cars and trucks besides mustangs and lifted trucks. ha thanks Clutch

where did you get the stencil for the rat? i want to go one on my hood

what does this do? its under the driver side of my seat and from what i could tell the book says its a floor temp sensor. do i need it?:confused::confused::confused: any help would be great!

Today I sanded down the inside of the cab and grinded the floor boards found a lot of rusted holes through the floor board, :mad: then made about 100 trips to the parts store cause I couldn

17 from clovis ca just graduated highschool and going to ITT for computer matintance i run a muffler shop and a vitamin store GNC!!!! i have a 620 that i dont know what to do with

today i flipped the rear end back where it is susposed to go. replaced all the fuel line, dropped in the new radiator, hooked up the e- brakes painted the frame, changed the oil. replaced the distributer cap, changed the plugs and wires, changed the oil again cause i forgot to change the filter, replaced the fuel filter twice (cheap plastic). wired up new tail lights (trailer style lights), got all new fuses, went to the junk yard got a new used gastank and filled it with gas, went back because it had a hole and leaked all over my back seat of my car:mad:, went home and placed it on the frame with tiedown straps. tomorrow bleeding the brakes, and refiling it, welding wheel wells on, making mud flaps. pondering how im going to put a bbq on the back of the truck with a gas tank there too:confused:. gas and fire doesnt seem to be a good combo for me:lol:. also pulling out the interior and painting the cab black. can you believe that its going to cost me 500 just to register it in clovis ca!@#$! if you guys have any idea on the bbq in the back with a gas tank too let me know, i kinda want to use the bbq once or twice before i blow up :lol: theres only so many hours in one day

so as you have seen my 620 does not have a fuel tank. i managed to get one out of a junk yard and got it running today, finally got to wash off all the spiders and what nots that have inhabited my truck. i found a mouse in my exhaust when it turned over, too bad my cat wasn't out for batting practice it would have been a home run. either way, i have 4 hard lines running back to the end of the frame one is brakes the other is fuel in, i found out the the other is fuel return (all over my garage floor) and then i have one other, does any on know what the last one could be??:confused:

so i got my truck running after countless bike rides to the parts store, i got it to kick over. but after 4 tries, a nice size flame showed from the left side of the engine down by the headers, to my knowledge this is not right. any help?

well ya see one of the ideas we had was to incorporate a bbq pit in the back of the truck. i like to cook and when we go to the lake it'd be nice to have one right there. ill see if i can get back there to take a picture of the bed. its not that pretty from what i remember, the older brother was going to bag the truck so he notched the bed.