Jump to content

project620

Members
  • Posts

    41
  • Joined

  • Last visited

About project620

  • Birthday 02/01/1990

Profile Information

  • Cars
    1974 datsun 620, 1969 ford f250 1969 plymouth valiant

project620's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. They are from air ride technologies, they are not the cheap knock offs. They are pretty pricey at right at a $1000 for the pair. These are a little more expensive becuase they are 1 off custom ordered for a longer stroke. Thanks for your compliments!!

  2. project620

    How old are we?

    19 from Bakersfield, CA Currently in stockton going to school on a scholarship, training on being a CAT dealer Tech. with an AS degree. i am half mexican half salvadorean. cant wait to start earning some really green....got big plans for my 620.......
  3. gottem for 40 bucks for a pair...slightly used....
  4. Nexen (n3000) i am ruinnig 225/40 in the front with 245/40 in the back and i wanna get those to which the 225/40 to the back and put the 215/35 in the front. The 245/45 r too close to the frame.
  5. will 215/35/zr18 fit on the armada's??
  6. oh ok then so the thickness of the disc will make up for the space in between... the reason i chose to grind down the hubs was that way i wont have to bore out the next set of rims i want to get i just bolt them on and go!
  7. man i fucked up my bearing on the end of the steering box today....:mad: does anyone know wats it called so i can get it at the autoparts store. or not i ll just get it from the junkyard...:)
  8. project620

    My pl 520

    damn u twitter!!! (waving fist in the air)
  9. yea its a really tight fit between the tire and the frame. i got the bed off for right now. i was wondering if i was going to have to use spacers.
  10. instead of boring out the rims i grinded the front hubs.....made those fit i just thought i wouldnt need to grind the rear also....
  11. i test fit my armada's on my 620 today and i notice there was a space between the rims and the hub...i dont have the rotors in yet but will that make up for the space in between??:confused:
  12. where did u get the chrome titans?
  13. i am using stock mounts. it works great. the only problem i have is with the driveshaft length. idk if i should cut it and keep it two piece with the carrier bearing or cut it and make it into a one piece.

  14. ka motor mounts for wat kind of car? i took a look at ur pic u have or the setup and it kinda looks like u also used a washer on the top right?

  15. ok then i am going to order the ball joints from McMaster Carr. u gave me the number in one of the threads....have u found any pics of the setup closer to it.?

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.