cannabolic

looking for door lock setwith keys and ignition barrel with key to a Datsun Bluebird 910.

ok, firstly thanks for all replies! - cam moves freely - measured the cam: 1.165 (29.591 mm) & 1.488 (37.759 mm). Would that make .485 lift (12.31 mm)? - it has "B" & 72 deg stamped on back. 272? - rocker arms have various markings; "s12", "s16", "s80", "s-95","s84","75:" and 2x"5:.", What does that mean? Will measure cc as soon as possible. Only head is shaved and it was bought like this. I have a stock, untouched l18 in my stock 910 good read on olddatsuns!

hi, hope someone can help me identify the cam on my u67 head. Is this a stock l20 cam? https://goo.gl/photos/gTgdiX3YZsLipCMG7 https://goo.gl/photos/gtjRqm3tUwrQBLPK7 I assume I'll also need to shim my cam towers if head shaved app .063 ( 1,6mm) ? found that u67 should be 4.25 (107,95mm) untouched. measured mine and its 4.187 (106.35 mm). thanks

I am thinking to ditch the cap and drive without..

I think the kit contains a washer and the locking nut. Thank you for taking the time and looking into this. much appreciated,

Anyone

Hi" Does anyone know what part number this should be/is https://lh3.googleusercontent.com/6Ocqso1e9PpseCkEj1rqsl1xrxNkqLsVB9ZPd9N85mA=w1024-h548-no its a dust cap for the bearing. Its for a EU 1982 bluebird with IRS. The AUS live axle dust caps do not fit. Thanks

That's what I was hoping to hear Thanks guys.

Hi i'm Philip and new to the forum. I just cleaned a newly purchased head and found out that the one of the camshaft bearing bracket bolt got loose. http://img.tapatalk.com/d/13/08/06/nebydany.jpg[/img] Its a u67 and the question is...am i screwed? :-\ Do i need to replace?