Jump to content


pwrcat4000

Member Since 03 Jul 2013
Offline Last Active Nov 18 2017 05:37 PM
-----

Posts I've Made

In Topic: 521 Front end repair

16 November 2017 - 09:09 AM

mklotz70
Thanks for the link to the owners manual that was awesome!

 

In Topic: low oil pressure at start

14 November 2017 - 11:24 AM

Sorry I took so long to get back to you all the diesel oil and a new filter fixed it no rattle at all and no light Fixed it all for under $30 thanks to all for futer referance to anyone on this thread I used the standard O'Riley filter MGL51515 and Valvoline Diesel Blue 15W40.


In Topic: low oil pressure at start

28 October 2017 - 06:49 PM

Well this has been very informative as always you all are the best and I really like to hear your responses.
 

I have noise for maybe 1 sec definitely valve train sounds like the front of the engine at start regardless of cold/hot
The noise stops when the idiot light goes off I don't have a mechanical gauge
I don't rev the engine or try to drive or anything just let it idle
 

i change the oil about every 3-4k or when i install a different motor whichever comes first

I have been using Oriley SAE30 (sounds like this is not advised)
I just use the O'Riley MicroGard - Oil Filter Anti-Drainback Valve Included (maybe i should be using a wix or a mobile one)

So will a new oil pump help with start up pressure
if yes I am looking at these

ENGINETECH EP094
https://www.rockauto...1208977&jsn=679

HITACHI OUP0023 {#1501040F00A}
https://www.rockauto...jsn=679&jsn=679
 

DNJ (cheapest)
https://www.ebay.com...8E/302000794790


In Topic: Installing single Din aftermarket radio

27 October 2017 - 08:05 AM

tn_full_radio.jpg

It aint pretty but I am really happy with the way it works (just like the rest of the truck) the hands-free work pretty good considering the noise in the truck when driving!
speakers.jpg
Holes were all ready there upgraded the broke old ones for these!
 


In Topic: Installing single Din aftermarket radio

20 October 2017 - 07:19 PM

Just need fan and headlight they don't have to be Datsun or factory correct just need something that works I thought about maybe just making some out of wood or something the real pain in the ass is the fan knob not being there I will try to post a pic of my $20 radio installation later