selrahc360

What I am building weighs around 1200 lbs, trailer wheels are rated 1900 per wheel or greater and have to meet the same DOT standards as car rims. Also I put up a couple of different offsets to give people idea's. Since I know it is hard to find something that fits, giving choices is all I wanted to do and trailer wheels are not under the same import cap as car rims. Loop hole in the import duty.

http://www.amazon.com/Aluminum-Trailer-Wheel-Rim-6x5-5/dp/B00BFYFVH2/ref=pd_sim_sbs_auto_1?ie=UTF8&refRID=0MNSQDGZDEZAERDD831V

Hello, This is just general info but when I was looking for 6 bolt rims for my 720 hubs, I noticed 6 bolt trailer rims are the same bolt pattern. Anyway here is a nice example I have since decided to go another direction. http://www.amazon.com/Ion-Alloy-Silver-Machined-6x139-7mm/dp/B004X5Y7R0/ref=sr_1_62?ie=UTF8&qid=1398223225&sr=8-62&keywords=ION+Alloy+rims+6x139.7 Best, Charles

Well a update, might get some pictures at some point. I am selling the H190 rear $50.00 and the starter and alternator pair for $50.00 and 720 front brakes as I get around to it. I have all the parts I need on they came on SR20DE RWD has all that mounted. On the H190 the rear the LSD was driving the price up too high, $700.00 was more than I wanted to spend even though it was brand new. I also have a 720 Flywheel and a SR20DE redtop FWD that I was going to convert to RWD, still a good project, just not one I will pursue. For the rear I purchase a used but rebuild-able Dana35 with disk mounts weight 128 Lbs, for $50.00. Been cleaning it up, then will cut the brackets off for prep for the pan-hard mounts. Parts are cheap and available for this rear, gear-sets lsd's geared and fiction types. axle types 5 and 6 bolt. via rockauto, will work well in the 2x4 setup. Have also started building the jig for the front of the frame. Best, Charles

Bummer!

Hey Road Warrior, There is still a new after market diff available from a Japanese vendor tomei ? is about 800.00. TOMEI 562019 Best,

I have some build cost, but not enough put together to post yet. First pictures should be around May I will post pics of the SR20 engine and trans next week. Not the Redtop FWD in the garage, which is a mockup mule and a spare for internals and fitting headers.

Here is the price list from the parts I sold off, sorry the formatting is off. I sold many parts to Ratsun members, The build start is building the table to build the frame on I have two family projects in front. 720 Locost cost donor 130 Hood, valence Rat 45 Fan Shroud flea bay 140 Bench Seat Rat 48.4 Dakota wheel sold Scrap Did not fit 2 $ found in truck 71.26 Instrument Cluster flea bay 38.74 Mirrors flea bay 10 Battery local 34.87 Headlight buckets Rat 20 Passenger Fender Rat 238.83 Doors flea bay 40 Motor local 100 Bed and steering box local 20 Gas from old truck mower 20 for blinker shroud and switches flea bay 15 Driver side Fender Rat 25 Gas tank and sender Rat 37.65 Distributor Rat 200 Transmission Rat Sun Visors 25 seat belts flea bay 40 Rear springs local Steel rims 99.8 scrap steel $37.80, catvert $50.00, rad $12.00 local -25 Car Dolly -10 Gas -350 Truck cost -80 tune up parts -20 Dakota wheel purchase -18.24 Headlight buckets shipping -17.69 Instrument Cluster shipping -12.35 Shipping on turn switches etc and steering colum cover. -136 Shipping for doors -24.45 shipping for fan shroud -68 Bench Shipping -17.52 mirror shipping -15 Packaging -6 Booster packaging -28.19 Packaging -19.46 Packaging -11.38 tape -36.03 Packaging -10.33 listing fees ebay -25 misc. 470.91

They also make them from Miata parts, I was trying to keep it live since you can more fuel in the live axle then the independent Locost,

Road warrior, gets the prize, http://en.wikipedia.org/wiki/Locost trying to keep the build around 5K. On LSD they do exist I stumble on one in Japan by the time I go the auction figured out it was gone. I am thinking of redrilling the hubs for 4 or 5 bolt. but if someone has axles that fit and hubs that would work I would be willing to trade plus some cash since machining cost. If I had the rear axle drilled what drum could I use that would be four bolt or what inexpensive disk setup a 110 "200Sx"?.

Hi, I have been parting out a 720 truck, have everything sold off now I do not want, I also just sold the shorty to someone local in the tri-cities. Anyway just about to start the build phase. I have Variable SR20DE RWD and matching Transmission coming, I was going to to front driver flip to RWD, then I thought about it old trans incomplete SR engine with no electronics $$$$$. With the extra money I cleared form the truck, The SR engine is costing $825 currently, far less then modding the FWD SR, keep for parts or just sell it to a FWD fan boy got a pretty good deal on a long block. Figure I have to start spending at some point now anyway. Now advice: I have the front hubs and brakes and the H190 rear a 3.90 open. Now Should I just sell off the H190 and go with independent or live ford or gmc for the LSD. I have been looking for a LSD center and have had no luck. I thinking I can make the front hubs work with a drill, any suggestion would be good. Now since the build has started and the parting is done. Thanks, Charles

How to filter your searches. Basically all you have to do to avoid this is type your search let say nissan 280zx -$1.00 and poof they the $1.00 items should disapear for you. Same thing but different Nissan truck 720 -4x4 -V6 -2013 that should remove all the 4x4 and V6's and that year out of your search. You can learn more if you learn a little about boolean algebra, but for basic search the above hints should help you out. Best,

Yes if you want more off the line, lighten you flywheel or get a lighter one, over rev'ing a Z24 can cause the end of your con rod to stretch at the wrist pin.

Hi Chazhammer, You should have not problem getting some references about me, I have sold a few things to others here at the ratsun forum as well as though ebay and they seem to be happy. I have been parting out a nissan 720 for a locost project, part of that goal is to recover as much money for the build as possible for the car I am building, finally took the frame and the rest of the scrap to twin city metals today. Pretty much have the cost of the truck purchase recovered and the used SR20 motor I have purchased, so I have motor and drive train. My goal is to build the car for $2014 the starting year is how much you get to spend. When you make up your mind I will put it in one of those fixed price boxes. Best, Charles

Thanks!