HonSun

what can i say, hooked on phonix worked for me. yea i have seen the yellow one, not a fan. this is going to be much more in the style of somthing from old world minitruck meets jdm. paint wise im thinking off white, but we will see suspention will be leaf in the rear and going to coils in front w/ manual disks, just gona use a 1" + master probably from wilwood

was asked to move all my questions under one roof...lol so here is my build thread. pictures to come when i figure out a good way to keep posting them.. i know everyone likes pictures.. 69 521 w/ L13 lowered with 3in blocks in back nothing to fancy, but she will be when done. if you need pieces from motor or tranny let me know im not gona use them.. new drive train as fallows. 2003 S2000 motor. its a 2.0L 240hp/180ftq going to be using the full wireing harness and fuse blocks from the S2000 I have the 2006 6spd transmition w/ the higher finaldrive at time of the post i have new motor reddy to go in and new mounts made. time to start taring down the inside and getting reddy for paint. Keep Wrenching!

ok will do. thanks for the offer

hey guys swap is moving along. mounts are fabed.. but on to getting reddy for paint and thinking i want a tin dash.. any help sourcing one or what can i pull one out of? if i cant find one i do have a aluminum one from my old drag car.. thanks for the help. Keep wrenchin.

No, but got a good quote to have one cut. Why do you Have one?

i should have mentioned that i have a 521, but am seriously concitering loosing the 6 lug and going to 4 or 5 lug. the truck is never going to have 1000lbs in the back of it and im sick of looking for the wheels i want..lol

looking for a small disk setup, wanting to run 14-15" wheels if possable. any input? was looking at wilwood stuff but it costs a lot

still need a tailgate and dash pad. i really dont know what to offer on theese as i have not found any. post up some prices and we can go from there

I think it's the brand on eBay.

Yea the door glass. And I have no clue on what's fair For the dash pad. Sounds good about the gate. Let me know. And sorry bout posting here. I can't post in the classifieds section for some reason

69 521

Am in the market for both seals. Saw some from Thailand and some oem ones. Spendy buggers as far as window seals go. But any pros cons to different ones?

Looking for a few items for my 69 Black dash pad Drivers window And a tailgate In Salem Oregon, willing to drive a reasonable distance.

Try this. http://www.ebay.com/itm/330945429930?redirect=mobile

Always looking. Finding is a different story. Lol what do you have?