Tdubwells

Egr block off plate sorry been talking about this for a while

Tell me how much

sorry my mistake no ac at all just the smog pump ....update. slowly figured out the whole process , looking at multiple threads just having a little trouble getting everything to come off but haven't broken anything yet using plenty of PB blaster plan to leave pcv valve and stock plate just block all the other holes that are unnecessary any advise on the whole process would be greatly appreciated .

Have an l20b with hose leaks every where and can't seem to find a guide for dismantling the whole smog system... Found out 3/8 pipe flare fitting fit the exhaust mani holes but what do I do with all the ac crap Thx hope someone can help

thx ...its a rust bucket though gotta get a harbor freight welder soon i need new floor pans and battery holder ....also does any one know where to get cheap fenders for thees???

thanks for all the help guys got it back together after filing for about a half hour or so ...its my first 620 and it needs lots of work im sure you guys will be hearing from me more often ...here is a pic with the front end lowered

found a new anchor arm on ebay for 23 bucks plus s&h or should i not waste the money and try and file the splines ??? and the torsion bar/rod will not budge forward one bit any ideas really need some help... the picture is of mine

Splines are kinda f'd up how do I get the whole rod out and we're would I get a new one? Person I purchesed it from jacked it up using this method and I'm sure that's why the splines are damaged

And one will not go back In on the splines