xiaphin

Sent you a PM with my paypal addy.

Everything dash related minus the cluster SOLD to a local. Willing to take $75 for the console before tomorrow if not might sell to local guy as well.

I have a feeling someone else will buy it. Cluster sold to SSS510.

Ok I gotcha. I assume the pad unbolts from the frame. Sale pending to a local on everything dash related minus the cluster. If it sells the seatbelts, center console, and steering column trim will still be available. Any interest in the rear seats? If so I will post pics.

Been getting inquiries about just selling the dash pad. When you guys say dash pad are you talking about the top part of dash and the metal framework or just the top part? dgi and zhiguli510 asked same question - and dato over at zilvia DGI asked if it cleared the dogleg transmission I had. Yes it did. Have lots of interest in the center console from. dgi ariascarlos1990 two unknown screenames who saw it on here but emailed me 97s14.5white over on zilvia Picture of the back of cluster for those who asked (Just Joel and dgi). It is pic 9 in the link in first post. SSS510 is first one who says they want the cluster %100. $65 for the belts. Had one person e-mail me about them and another post on zilvia. If you go to the link to my photobucket, image 36 of 41 you can see a small crack in one of the steering column pieces up at the top. I'll take $30 shipped for this. I'll take $30 shipped for this. Looks like some lines might be forming, take a number. Doing my best to keep track of who was first and for what.

Getting lots of attention with these parts. 10+ emails and PM's on the items in a couple of hours here and over on zilvia. All e-mails and PM's replied to. $100 for console $100 for cluster $65 for radio $225 for dash

Located in North Carolina. Best way to reach me is by e-mail pharrphaster@gmail.com I know that I dont have hardly any posts on this site but I'm legit. Same name over at zilvia, nico, carolinanissans, g35driver, and 300zxclub. With that said here is what I have. Turning my car into a SCCA E-Prod and don't need this stuff. Complete UNCRACKED dash with radio, glove box, heater controls, heater core, vents, and gauge cluster with SSS tachometer (one broken mounting tab from previous owner). It is not a dash cover/cap. Car was completely redone back in the mid 80’s and previous owner purchased a new dash. Also have the metal dash pieces, center console, steering column covers, seat belts, and rear seats amongst other things. R160 Diff with axles for sale as well. Haven't seen a complete dash for sale in a while so I'm thinking $450 obo. If I'm way off base on the price its because not much to base it off of unlike a S13 dash. All photos can be found here - Datsun 510 Parts For Sale Open to offer on the other items.

My 510 had the dogleg transmission hooked up to a L20B in it when I bought it 4 years ago. Weird at first but I actually came to really like it after a while.

Mother almost gave birth to me in a White 72' 510 SSS, dads old car. Got my first Datsun when I was 19, 1971 240z ITS racecar. Bought my first Datsun when I was 21, 1972 Datsun 510. Forgot to put that I'm 25 now.

That was the most viewed video on youtube a couple months back before the "Jizz in my Pants" and Susan Boyles videos. Personally would like to see a gymkhana competition over the d-1 style drifting.

Got this video in an e-mail from a friend of mine. Thought yall would enjoy. Dyno simulates the g-forces experienced by a 911 on the Nurburgring Nordschliefe circuit!

Thats what my dad and I thought, that it was factory. So I guess the braising is factory then too. Also found that the doors are braised where the "window frame" meets the top of the door. Ron, who soda blasted my car, said that his friend who build old hot rods and muscle cars melts the lead out with a torch and fills the gap back in with bondo. Pretty sure I'm just gonna leave it alone.

Got my five and dime soda blasted last Friday and discovered bondo and rust, which were expected, but also what appears to be lead filler. Bottom of the B-pillars, all 4-corners of the front and rear windshields, and lower corners of the Quarter window have the filler. The joints also appear to be braised together at the rear windshield and quarter windows. Anybody else noticed this before, if indeed it is factory. Car is a January 72' 2-Door.

I wouldnt mind having the G35 seats but pointless for me since no one could sit in them due to a rollcage. Sure would look sweet though.

Check out the Isis manifold at enjukuracing.com It looks identical to my Forced Peformance manifold but at a third of the price. http://enjukuracing.com/isis-tubular-exhaust-turbo-manifold-nissan-sr20det-s13s14-p-8592.html?cPath=24_191 Forced Manni on my engine, http://store.forcedperformance.net/merchant2/merchant.mvc?Screen=PROD&Store_Code=FP&Product_Code=HDRNissanSR20&Category_Code=Nissan-Exhaust