510farmer

I thank you for the advice i know the size and have also done the following, store, tire shop etc no one seems to know anything about any substitute other than going to a machine shop or drilling the rim just think $200+ for lugs is insane!

Hello! Is there anybody out there? knock knock is this thing on?

Hey guys I have some Hayashi street II, that have some long thin shank lugs that I can't find but over sea's for a insane amount of money for lug bolts https://www.nengun.com/hayashi-racing/street-ll-wheel-studs does anyone know of a sub that's affordable thx farmer

First off thx guys for the replys i do have the tab on top of the steering box and I can see it running into that, across the top of the tranny than going down the passenger side also talked with The Keeper and he also confirmed thx again guys farmer

Hey putting the 510 back together after about 5 yrs of laziness and all my pics of my tear down are gone on a crashed lap top try to see the route the speedo cable takes coming out the firewall could someone help me out with a pic thx farmer

What up with the Frankenstein neck spokes?

http://rs1330.pbsrc.com/albums/w574/farmer510/Mobile%20Uploads/image_zps8cbyqf7l.jpg?w=480&h=480&fit=clip Wasn't rusty wasn't damaged I can't post the pic from my iPhone But here is the can

Really! This is coming from someone that lives in th O.C. That's some funny shit

Huh?

Ok how do you find the Img code No luck Thx farmer

http://s1330.photobucket.com/user/farmer510/media/Mobile%20Uploads/image_zpsc3cyk09x.jpg.html?filters[user]=135670147&filters[recent]=1&sort=1&o=3 Let's see if this pic works http://rs1330.pbsrc....&h=480&fit=clip How about this Don't know how to post pic from photbucket from iPhone 6

So about 6:00pm tonight I was in the house in the A/C it was 107 today, when I heard a loud bang. Sounded like a m80,we have plenty of kids setting off fireworks around the neighborhood. Didn't think much of it but I went outside checked the house and the cars checked the garage you know just checked things out. Nothing was out of place,and went about being lazy on the couch About 10:00 my wife asks me if I was doing any painting, I said no! But she insisted she could smell paint. So I go in the garage where my 510 is, and I can smell paint real strong. I turn on the light and I see black paint blown across my garage door. I was thinking crap! As some of you know my 510 is a original paint garage find that's in the midst off a 2+ year engine removal and engine bay repaint, but I have been real lazy and life gets in the way etc etc etc So when I see the paint one the garage door I get the sinking feeling, of damn there's going to be paint All over the car. So I go to inspect and no not a single drop hit the car. Or anything else. I collect vintage R/C cars, slot cars and hot wheels , so the paint can was in my cabinet and when it exploded it blew the door open the door hit my hayashi,s and didn't allow the door to swing all the way open so the force was forced to the side up an down,so on top off the cabinet sits 4 of my vintage R/C cars plus display case of my slot cars,to the side was my display case of all my redlines. Not one drop hit anything except for a drop or two on my tires on my rims that were stacked in front of the door ,the ceiling got hit the floor and the garage door but nothing else. I dodged one today, something's telling me to get back to work on my car. but just a heads up, if you have spaypaint in the garage this is a chance you are taking, luckily that one was in a cabinet Thx Farmer

Has anyone found rubber replacement bushings for the idler arm For the stock idler arm Also has anyone used the delrin bushing as shown on the ermish site Mine are beat Any info or links would be great Thx Farmer

Did someone say Bakersfield

Looks like two inch cut on each side of the bend where the existing mounts were, looks feasible Do you think it would be easier to cut the bend out, than figure out the cross member to the frame mount first Than once you have the frame mount with the arms in the rite place, put the cut out c-bend piece up to it mark,cut it,weld it done Looking good Keep up the work Farmer