ADrummond

He's right, it's gone. Thanks everyone! Andrew

Ragsie, I still have the radiator. Is it worth shipping to you? hyphy, I still have the NOS lower grill trim. I don't have a photo, but imagine a really shiny piece of stainless trim, still in the Nissan packaging. That's what it looks like! Jefe, no, the door panel it isn't torn. Sorry it's taken me so long to get back to you. The rest of you, I'll get to your PMs as soon as I post this. Thanks for your patience. No longer having a Datsun, dealing with Datsun parts hasn't been my highest priority lately, but I would like to see it all go. What's left: very nice front bumper $80 a few misc. interior parts kingpin kit $20 (free spindles to rebuild then swap in!) disc brake brackets $60 Grant steering wheel adapter for 521 $40 doors $free Andrew

1fstdat, I still have the doors; they're yours if you need them. hessianben, I'll look. I don't think so, though. cruez, no idea. It'll probably fit in a priority mail flat rate box, though, so $10 if it does. jefe, the panel's yours if you want it. Anyone I missed, sorry - I've been busy. Try again if there's something you need. Everyone, PM me for best results - I rarely look at the forum, but I get an email alert when I get a PM. Andrew

Some of the emblems in the photo are sold, but I still have some 1600s with all three pins intact. They're $20/pair. The chrome isn't perfect, but should polish up pretty well. There was some interest in the 1300s, but they're still available. $20 a pair for those too. All pins are intact on those as well.

I had a look at the doors - there are in fact two straight ones, but they're both from the passenger side. And the green ones are pretty rusty on the bottom. You can have them if you want them. If not, they're up for grabs, free to whoever comes and gets them! The pedals are available, but I don't have a steering wheel - just a couple of horn buttons. I do, however, have a 521-specific Grant steering wheel adapter. $40 for that (not the one you can see in the door photo; I don't know what that is. 620 maybe? There's a gap.) Andrew

Velvetpants57 - I have both. $25 for the pair. SUN520 - No problem. PM me your address and I'll figure postage. Air or surface? thekingskid - visors - $20/pair. The vinyl's dirty, but will clean up. The chrome plated steel rods are rusty like all the rest. Wiper motor - $10, don't know if it works. I'll see if I can test it sometime in the next few days. dwnshfter - they're just the brackets, and yes, they'll work on a 620. Search for Fineline's extensive writeup for details. mnementh666 - I have both sides. I'll take a closer look tonight to see how they look, but my recollection is that I have a pair that are pretty straight and relatively rust free. All the innards are there.

More parts! It's all gotta go, so make me an offer on anything! Quantity discounts gladly given. Again, there's more, so let me know if there's something you need - I may have it. Front bumper in excellent condition, one tiny ding on the underside $80 front valence in excellent condition, one ding about the size of a fingernail $80 radiator $40 rectangular side markers, complete set of 4, will separate $5-10 ea NOS stainless lower grille trim $50 1300 ($20/pair) and 1600 fender badges ($10-20/pair) U-joints for a two-piece driveline (qty 2; Atom, you can have these if you want them, because they were meant for your truck!) $10 and the old list, updated: one set of Beebani/Fineline's rear disc brackets, unused $60 W53 head w/EFI intake ports $50

I have one, but it's not perfect. Kind of saggy in the middle, but what should I expect from a 40 year old piece of cardboard? What's it worth to you?

I sold my truck, and I still have a ton of parts. If there's something you're looking for, ask - there's more than what I've listed, I just haven't gone through it all yet. There are a few parts I haven't listed yet; things like a nice front valance and a good front bumper - I'm thinking of putting them on ebay, but if you're interested, make an offer. I'm in NE Portland. I'd rather not ship, but you might be able to twist my arm if you buy enough! PM if you have questions or want to see something

I've got a metal dash out of a 520. It'll bolt right into your 521, a perfect replacement for the cracked foam pad you've got now! I have some miscellaneous stuff like switches and a gauge cluster I'll throw in if you need them; otherwise, what you see is what you get. I may have a glove box, too - I'll look. The defrost ducts are a little different, but I think those off a 521 can be made to work with a little effort. The mounts should be beefed up anyway, because almost every one I've seen was broken at the one (fragile) mounting point. The glove box door is included, but it's the black textured kind - that's what the truck came with, and I think it may have been that way from the factory. I've seen photos of other 520's with those, and I've also seen them with smooth, body-color doors. The radio cutout has been modified - enlarged a bit, but I don't think it'll show with a stereo installed. I'm in NE Portland, and can be around this weekend or one evening this week if you want to have a look. $150/bo cash only.

The cab and bed are gone, but I still have a roof, cut off at the bottoms of the front pillars and across the panel below the rear window. It's from a '72. so there are seatbelt mounts in the pillars. The rear window's there too. Free to anyone who can use it, and can come pick it up in NE Portland. I may be able to take it to Canby, but no guarantee I'm going, so we'll see about that. Andrew

Sold!

Yeah, it's one piece. I have one from a 520 and one from a '69 521, and as far as I can tell they're identical. I haven't compared them to a two-piece driveshaft, so I can't say for sure the flanges are the same, but I'd imagine they are. If you have dimensions I'll check it out. Andrew