720Phil

OK, OldHillBilly has sent me the info from tag from under the hood. Can anyone decipher it? Tag reads as follows: DATSUN type - KHY720, Engine Capacity - 1952cc, Max HP/ RPM - 92/ 5200RPM(sae), Wheel Base - 2815mm, Engine Type - L20B, Chassis Number - KHY720-********, Nissan Motor Co., LTD, Yokohama Japan 44W11. Tag apparently does not say list Transmission or Trans axle directly. Phil

I will check the diameter and count the splines. Will that help?

Checked the front last night (the old mark it and spin it routine) and the drive shaft was just about to complete its 4th revolution when the mark on the on the left flange made its 1st revolution. So a 3.889 it is! So does that make this easier or impossible? Phil

Anybody know what HE38 means?

Hmmmmmmmmmm. Just looked under my hood at the codes. Never mind I have removed my Diff and counted the ring and pinion and did the math to come up with the 4.375. I had a friend help me and he is an off-road guy, and we both counted the same thing. The VIN says I should have a 4.375. My tag says FS5W718 HE38! The reason this disturbs me is now I wonder whats in the front Diff? Any guess? Phil

Looking for Ring and Pinion or complete 3rd member for a 81' KC 4x4. H190A with 4.375:1 ratio. Thanks, Phil

Do you know which rear differental you have? I need a H190a 4.375:1. I am having a hard time finding ring and pinon for mine. Thanks, Phil