Jump to content

BRAAP

Members
  • Posts

    140
  • Joined

  • Last visited

About BRAAP

  • Birthday 10/20/1967

Profile Information

  • Location
    Sandy OR
  • Cars
    Many Z cars
  • Interests
    Flying, Sports cars, and the list goes on...
  • Occupation
    Owner, Rusch Motorsports

BRAAP's Achievements

Newbie

Newbie (1/14)

12

Reputation

  1. Both diffs with shafts, and suspension, SOLD! Clock and Service Manual still available.
  2. Quill shaft, SOLD! I still have plenty of pins left, can pin your quill shaft. :cool:
  3. This one sold last week. I have several pins still and can pin your quill shaft if you like for $30 includes return shipping within the lower 48 states, via Priority mail, (2-3 days shipping) Turnaround time would be 1 business day. Contact me via PM if interested. :) Take care, Paul
  4. Used stock Datsun L-series quill shaft, (oil pump/distributor drive shaft). Cleaned, bearing surfaces polished, overall good to excellent condition, drive gear pinned to the shaft to prevent slippage in high performance applications, pin has been staked to prevent its coming back out. Fits ALL Datsun/Nissan L series 4 and 6 cylinder engines with standard electronic or points distributor. $40 shipped, (lower 48 states only), $35 local pickup. PayPal, Money Order, Cash accepted. Sandy OR If you have a shaft you would like pinned, (special gear, Turbo dizzy etc), contact me via PM or E-mail, $25 to pin your quill shaft, plus any shipping cost if not local.
  5. L28 short block. Comes with oil pan, oil pickup, oil pump, early Z starter, oil press sender, and alternator, SOLD
  6. Pictures are posted, damper is in the bottom two pictures, lower right hand corner of those two pictures. ;) It has 2 pulleys, front one is a skosch smaller than the rear, factory 260-280Z damper. The 240-Z came with a smaller diameter dual pulley damper, both V-grooves are exactly the same diameter. I also have one of those for sale, it has the removable third pulley on it as well for A/C, also comes with timing pointer, picture in this ad below; http://community.ratsun.net/topic/23428-fs-l-series-cam-towers-nissan-tool-bag-throttle-bodies-l24-crnk-dmpr/
  7. Prices "include" shipping, only within the lower 48 states, (local pickup/delivery prices also posted). Sorry I will NOT ship to Canada! Items will ship within 24 hours of payment received. Payment of cash, Money Order, or PayPal preferred. Personal check is OK but part/s will not ship until the check clears, approx 10 days! Located in Sandy OR, just outside the greater Portland area. Contact me via PM or E-mail braapz350@hotmail.com Brand new Porterfield R4 compound brake pads fronts are for 70-78 S-30, rears are for 79-81 S-130, (Early style elephant ear calipers). These were spares for my 240-Z race car with a ZX rear disc conversion, no longer have the car so no longer need these extras pads. Fronts are 70-78 240, 260, and 280-Z. $40 shipped, ($35 local pick-up) Rears are 79-81 280-ZX/ZX-T (also fits 80-81 200SX rear) $35 shipped, ($30 local pickup) 75 Fuel rail with 3 fitting fuel pressure regulator. ;-) $50 shipped, ($30 local pickup)
  8. Prices "include" shipping, only within the lower 48 states, (local pickup/delivery prices also posted). Sorry I will NOT ship to Canada! Items will ship within 24 hours of payment received. Payment of cash, Money Order, or PayPal preferred. Personal check is OK but part/s will not ship until the check clears, approx 10 days! Located in Sandy OR, just outside the greater Portland area. Contact me via PM or E-mail braapz350@hotmail.com SOLEX barrel style .... SOLD! R-180 mustache bar with Poly bushings installed. I was using this mustache bar with the Suby R-160 LSD in my 240-Z race car. $75 shipped, ($55 local pickup) Solid diff mount, fits 70-78 240-26-280Z. SOLD! L series 6 cylinder main bearings, new in box/package, Federal Mogul brand, .010 undersize, (.25mm). $25 shipped, $15 local pickup Fits L20a, L24, L26, L28, L28E, L28ET, LD28 engines, 69-mid 80s. 240-Z adjustable salve cylinder push rod. A bit rusty, as-is $15 shipped, ($10 local pickup)
  9. Prices "include" shipping, only within the lower 48 states, (local pickup/delivery prices also posted). Sorry I will NOT ship to Canada! Items will ship within 24 hours of payment received. Payment of cash, Money Order, or PayPal preferred. Personal check is OK but part/s will not ship until the check clears, approx 10 days! Located in Sandy OR, just outside the greater Portland area. Contact me via PM or E-mail braapz350@hotmail.com 240-Z dash harness recently removed from its dash, with dimmer, complete cig lighter and fiber optic bulb and optics. Overall good condition, no cut wires, all the connectors in good condition, it is quite dusty, cobwebby, (is that even a word?). There are two wires at the ignition switch, both are Green with yellow stripe, that appear to be without a plastic connector surround, (see pic), that is the only flaw I was able to find in the harness, other than it is quite dusty as you can see in the pics. The Fuse block and cover are sold. I am also including the complete cig lighter, dash illum dimmer and fiber optic bulb and optic strands. This harness had the Push-Pull style hazard switch, switch is no good, but will include. Harness with dimmer and fiber optic; $40 shipped, ($30 local pickup) Main connectors. Harness. The Green/Yellow wires. [
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.