mikde

let me know ill buy a set

1994 - 1995 Honda Passport, 1989 - 1993 Isuzu Amigo, 1988 - 1995 Isuzu Pickup, 1991 - 1995 Isuzu Rodeo, 1986 - 1991 Isuzu Trooper

centric gcx semi coated rotor 320.43009. is what i bought but havent used yet

I will go find the rotors a came up with and get you a part number by the afternoon. I still dont have the adapters. mike

ill keep that in mind. I may build my own wilwood setup.

How much?

thank you for the help I can do the caliper bracket. I would to get the rotor adapters instead of making them can I get the rotor part number ?

is anyone still making the d21 z32 caliper and rotorbadapter? mike

all gauge cluster mounting tabs were cleaned and dielectric greased the tabs. I even added an extra ground to the metal frame on the gauge cluster. no lights still. I found a thread for mid 70's b210 with the same still dimmer switch. That said to jump terminal 2-3 together to bypass the cimmer. I just blows the fuse.

agreed just more info

also using a wiring specialties stand alone harness for the ka24de

after 10 years my 1978 kc ka conversion is finally running. the dash lights do not work things ive checked 1) I have power to the round 14 pin connector and to the light socket. All bulb new and power tested 2) turn signals, emergency flasher arrows work, as do the headlight low/high beam 3) power to the 2 leads of the dimmer switch using the plug ground. (any idea how to test the dimmer?) 4) gas gauge works, not using temp/charge lights not sure if im missing a ground or bad dimmer or? mike