Jump to content

hardhead320

Members
  • Posts

    60
  • Joined

  • Last visited

About hardhead320

  • Birthday 07/01/1960

Profile Information

  • Gender
    Not Telling
  • Location
    Wildomar, California
  • Cars
    69 pro street Chevelle: 65 L320
  • Interests
    Nice Datsuns, Chevys and Nice Knockers
  • Occupation
    Electrician

hardhead320's Achievements

Newbie

Newbie (1/14)

12

Reputation

  1. I have a used J 15 motor don't know much about it. It was a spare motor I got with my truck. Now it is taking up room in the garage. It seems to be a good motor. Make me a cheep reasonable offer and you can have it. Contact me @ 714 296 6760 or nzkiwi1965@hotmail.com - I am in Orange County CA
  2. The glass shop that makes glass for the 320's is called Kotto Auto Glass - 800 810 4933 - ask for Hetty.(rhimes with Betty) He custom cuts automotive glass to fit Terry
  3. I have contacted a Southern California auto glass company who will start making new windshields for the 320 Pick Ups. I ran this add once before and did not get one response! All you 320 owners with broken windshields missed the last order don't miss this one I will be placing an order in the next couple of weeks so tell a friend. The windshields are going to cost $300.00 each so far I have an order for 6 windshields. Call me if you are interested Terry 714 296 6760
  4. I have contacted a Southern California auto glass company who will start making new windshields for the 320 Pick Ups. I ran this add once before and did not get one response! All you 320 owners with broken windshields missed the last order don't miss this one I will be placing an order in the next couple of weeks so tell a friend. The windshields are going to cost $300.00 each so far I have an order for 6 windshields. If you are interested call Terry at 714 296 6760
  5. I have contacted a Southern California auto glass company who will start making new windshields for the 320 Pick Ups. I ran this add once before and did not get one response! All you 320 owners with broken windshields missed the last order don't miss this one I will be placing an order in the next couple of weeks so tell a friend. The windshields are going to cost $300.00 each so far I have an order for 6 windshields. If you are interested call Terry at 714 296 6760
  6. Mike thanks for the quick response. Ok so bottom line any of the cars you mentioned above, the spider gears will interchange with my 320 axels. Exception being the 4x4 cars, plus if I want to identify any rear end ratios on any cars other than the 720 I have to remove the dif cover to see the ratio stamped on the ring gear right?
  7. Wayno and Mike thanks for the reply the vehicles you guys listed I will be looking for to possibly remove the rear end out of or worst case scenario buy the whole car outright to use the rear end. I guess you guys are leaning towards just changing spider gears out to new ratio vs. replacing whole rear end. You made it sound easy when you said it took you about an hour to make the spider gear swap out. Mike great pictures as far as the number of teeth in the carrier. And now I have to determine what rear end I have and what gear ratio it is, got any suggestions on what I have? (gear ratio) Does Datsun mark the housing with a tag or a stamp in the cover? Or a web site with a list? I will be looking next week for a new rear end out of a 510,521,620 or 720. So I will need to know how to identify correct gear ratio on perspective new rear end. You guys have been a big help. Like I said I was a little shocked when I only reached 50 mph. I want to be able to drive this truck to shows and in California you will get ran over going 50 mph when everyone else is doing 75 mph once again thanks.
  8. thanks I am still recovering from it ! I did everything you see except upholstery.
  9. Recently finished up a total resto on my 65 320 drove it down the highway and could not believe it only does 50 mph, the J15 engine sounded like it was rev'n about 5000 rpm long story short 50 mph is max! I heard roadster rear end will bolt right in, is this true? and if it is what year and model will go into my L320? Brakes, drive shaft, E brake cable, shock mounts, diff width? Through me your opion and any information that could help me. I am thinking of buying a cheap broken down roadster that is trashed but before I do I need to know what year and model will fit my L320. 50 mph is just not going to cut it!
  10. Got mine about a month ago for a cool 100.00 and even rechromed! keep looking in parts 4 sale section religiously took me awhile too! drop a line to Tana the datsun lady she has worked some miracles 4 me on parts I thought i would never get. good luck ! try getting shit for a 320, holly f...
  11. I had the same problem with my f4w63 tranny "miss matched parts" wound up having a machinist sleeve and extend my bearing holder by about an inch. Beat my head on the wall trying to figure it out. :angry:
  12. now its just sitting on the shelf dont really have a use for it I will probably sell it. Were these trannys problematic?
  13. well break out the debit card and open up the tool box and bring her back to life! These guys at ratsun are the best dont be afraid to ask :D
  14. what is that red and white sedan next to the orange wagon? that shit is bad ass man I would love to have one of those!!!! :cool:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.