Big_E-Dog

30mm calipers on an m30 strut with q45 rotors....redrilled to 4 lug lol.

i got the maxima calipers with the 200sx rotors and fabbed up a bracket and they work great with the e brake cable. i just connected it to the cable that was there until i went with the coventional pull lever in the center console. but i will admit. the hardest part was fabbing up the caliper plate to work with the origonal so everything is held together like stock.

looking for a rear end with 3.7 final drive....whats my options with less work? mazda? or one from a newer truck?

going down 7-16-17 https://www.facebook.com/events/174694059735692/?acontext=%7B%22action_history%22%3A[%7B%22mechanism%22%3A%22bookmarks%22%2C%22surface%22%3A%22bookmarks_menu%22%2C%22extra_data%22%3A%22[]%22%7D%2C%7B%22surface%22%3A%22dashboard%22%2C%22mechanism%22%3A%22calendar_tab_invitation%22%2C%22extra_data%22%3A%22%7B%5C%22dashboard_filter%5C%22%3A%5C%22upcoming%5C%22%7D%22%7D]%2C%22ref%22%3A46%7D

help as in need a harness made? or what connects to what?

we shal help as long as your cool B) as for the motor hooking up shits hella easy! dont be deterred because it looks like alot. just get in there.,

i didnt think this thread was gonna get any traction but here it goes lol! 87mm is stock for pistions, those pictired kinda look like turbo pistions tho....i dont know if your rebuilding a turbo motor or going na/t and that aluminum thingy is a FPR oil pan looks good but that manifold.......make shure there aint no leaks injectors are older type 84-85 top feed.....dont look upgraded just clean

https://www.instagram.com/p/BTIqYSiBkKT/?taken-by=webster2k314

front and rear futofab sway bars.....Palomar run on Saturday!

2-300hp sounds about right with a good turbo and tune. youll get 210 if you just rebuild the motor with turbo.

got a short with my turn signals :(

x3......you gonna have to give up your supplier lol!

link to those rear window blinds....shits dope!

tophats for the springs too....techno toy has some with the bearing thats just sexy....running them now!!!