Slide Star

Thanks for the pictures guys! I will be able to try these things Thursday ill keep you posted! :thumbup:

I'm sorry I am a total noob when it comes to brakes, what is the reaction plate? Also, thank you so much for the help so far! :thumbup:

Ill read up on it thanks!

If it says on the side of the master I can check tomorrow!

I have a wilwood my dad bought for another project of his. Problem is it's not split for rear and front. Is there a way I could use a splitter in the line or something? I need this car ready for a competition this weekend :hmm:

It's the oem size for a 72 240z. I guess my old man and I will try getting the air out of the master cylinder!

bumpity!

Ok i will give that a try, thanks for the help! I was also thinking maybe the 240z master is to small to power these bigger calipers... Maybe a 280zx one would do the trick if it's a little bigger?

The calipers are brand new, so is the master. It is the factory 72 sized master don't know the specific diameter sorry!

Bleeder screw is on the top half of the caliper if that's what you guys mean.. :geek:

Hey guys! I swapped the toyota 4x4 calipers onto my 72 Z and now the brake pedal nearly goes all the way down to the floor and can barely stop the car. They are so bad that I won't drive the car on the road being a safety issue. There is no air in the lines at all and I am completely lost. Need this fixed by this weekend if possible! Any ideas??? Thanks!

Eric, just shoot me an offer they need to be gone through they are dirty, good core to start with, they may be able to be cleaned up though! Text me and I can send you some pics!

Have the original SU carb set up off my 72 so they are 3 screw bell tops. Went with tripple webers so I dont need anything regarding these. $300 Have my bumpers in average comdition. The front one has the rare top extra bar thing. (don't know what it's called lol.) Have 2 L28 heads, a complete l24 and tranny. Ran when pulled from my car, been sitting (outside for a year though) Also have a balanced L24 bottom end in good condition, covered up and stores inside. Text is easier for me not on here much 425 773 0769. Thanks!

Ahhhh you crept over here from starquest. Now i'm not alone!! B) . How do you upload pics? I can't figure it out ahahaha.

Do you still have it? I am in Monroe B) . Are you interested in parts trades or partial parts trades with some cash? Also have a 240z I could trade except it would be a lot of cash on top for you...