Jump to content


Member Since 15 Oct 2012
Offline Last Active Jun 04 2018 03:51 PM

Posts I've Made

In Topic: LED Headlights

20 May 2018 - 08:04 AM

Ah, I see the driver's side is the LED.... :blush:


So does the low beam have a cut off pattern or does it blind oncoming traffic?


Sorry for the late response. Yes the low beam has it's own pattern. When you turn on the high beams the lights switch from low to high. However when I hooked them up to the middle lights they only came on as high beams like normal. I'll take better pictures from in the cab with both outside lights installed when I'm home in a few weeks.  I'll do in both high and low. I'll be able to give you better input regarding the color too.

In Topic: LED Headlights

09 May 2018 - 08:15 AM

I got the LED head lights below. I ended up using a dremel to cut the light housing to fit, instead of cutting the sheet metal, just in case I decided to go back to stock lights. Wiring wise its plug and play. The LEDs are a lot brighter than halogen. Also, the LEDs will work in the inside housing and work has high beams only if you wanted to replace all four. I made sure to test them in both housings.






Low beam




High beams



In Topic: New owner of a Datsun that floats--->

04 May 2018 - 09:16 PM

Good thread for those wanting to know when the Arizona boating season starts haha

In Topic: POST Craigslist eBay ads here...

04 May 2018 - 02:32 PM

Ebay has a 15% off everything sale right now. till 7PM PST

In Topic: 620 LWB with wide 18's?

30 April 2018 - 04:43 PM

Depends. Do you care if it rubs? A lot?    ^_^


More rubbing than a slight fender rolling would take care of? If so then nevermind haha It'll be on a 620 with 3in blocks and 720 springs if that helps figure out the rubbing. I saw flatcat say +10 is even with the fender so maybe that's the way to go