Jump to content


banzai510(hainz)

Member Since 05 Apr 2007
Offline Last Active Today, 01:44 PM
*****

Profile Feed

Photo

banzai510(hainz)TheBirdistheWord

watch this
http://vimeo.com/19077890
Mar 07 2012 08:57 AM
Photo

banzai510(hainz)OldSkool

contact Byron510 on here or the 510realm for those specs you gave my on daily driver status with that cam. He has more knowlegde on this but I thinks its too big and compression will be OK only if you run minimum of 93 or better(if avail)
Feb 25 2012 06:18 AM
Photo

banzai510(hainz)screamer510

let me know how the wheels fit when the bumpsteer spacer is removed
Dec 14 2011 06:36 AM
Photo

RedBannerbanzai510(hainz)

Ive watched your vids today, thinking about what to do with my 710 (the one ive always wanted) , I was wondering what you would recomend reading or watching to learn more about building a reliable "streetable" l-series.or Would you recomend a ka swap over said "streetable" l motor. I intend to take my time to make this a show worthy daily driver I can pass down later in life.
Sep 15 2011 02:47 PM
Photo

banzai510(hainz)Illest_wifey

take 75$ FOR THE KONI SHOCKS SHIPPED
Sep 07 2011 07:33 AM
Photo

banzai510(hainz)doughboi916

whats the update on this
get it running? put fuse back in? blu wire?
Jun 22 2011 05:33 AM
Photo

banzai510(hainz)blackdeth666

could be overfilled but hard to really over fill it as oil comes out as your screwing that big nut back on. if you thinks its tranny oil(has that smeal and is like honey its comming out the front by the block.
Im only guessing it could be over full but datzenmike might no more as he more a trans guy.PM him and se ewhat he says.
but if leaking from fron the clutch will get oil and go ...
Jun 15 2011 10:11 AM
Photo

blackdeth666banzai510(hainz)

its still leaking but I've checked the oil level a few times by pulling the plug on the side. Each time I've pulled the plug oil stars oozing out so I know its not empty. Could it be over filled? Our just a bad seal like we suspected? No front end swaps or frame swaps for me! but a IRS swap is probably in the near future
Jun 15 2011 09:56 AM
Photo

sambanzai510(hainz)

Dude just curious how the aluminum flywheel is doing on your l series motor. Also how light is it? ??
Jun 14 2011 04:28 AM
Photo

banzai510(hainz)wayne080866

need to get a supplier in the states to buy these. a good demand here but prices could be better. As you know 510 guys here have NO MONEY!!!!!!!
May 31 2011 09:40 AM