Jump to content

Meticulous

Members
  • Posts

    100
  • Joined

  • Last visited

About Meticulous

  • Birthday 08/28/1984

Profile Information

  • Gender
    Male
  • Location
    Yakima, WA
  • Cars
    81' 210, 99' f250, 68' Camaro
  • Interests
    Cars, Art, Hiking, Hunting, Business
  • Occupation
    window washer

Meticulous's Achievements

Newbie

Newbie (1/14)

3

Reputation

  1. Thanks guys i figured it out. Had a major vacume leak on the manifold. Runs like a dream, now i can break in the motor!
  2. Lol yes i adjusted the valves. Like i said it idles cold but very fast with mixture screw 4 turns out.
  3. Timing mark is at 5° with the rotor pointing at #1 so im sure timing is fine but ill turn it a tooth and report back.
  4. So when its cold and choked i can get it to idle but its high and im more then 3 turnes out on the mix screw but dies with throttle and dies when butterflies open up when its warm. I bout the carb kit for my motor and it worked great befor my rebuild and im wondering if polishing out my intakes on the head has somthing to do with this. Motor is all stock except the carby.
  5. Do u know what jet size is in ur carb?
  6. I have an 81 210 with A15 fresh rebuild. I cannot seem to get my carb to run the engine.what jets size are you guys using? Carby worked great before I pulled the engone before the rebuild but i was more than 2 turns out on the mixture to make it run. Some advice would be helpful thanks.
  7. Was hoping I could buy one in America or even on here for that matter.
  8. Im having a hard time finding makers online for a performance camshaft for my A15. Can anyone lead me in a good direction?
  9. Well I found a complete engine rebuild kit for 280 with the pistons but those pistons you pointed out look to be from japan but there 130, hmmmm decisions decisions.
  10. That looks like what i need! Know of any manufacturers though, i would feel safer buying from a buisness
  11. Doing an engine rebuild on my A15 and im having trouble finding oversized pistons, where do I look? rockauto did have some but not at this time.....looking for .20 oversized
  12. nvm fixed it, took my pocket knife and scrapped the fuse connections, works like brand new!
  13. Hey im having the same problem with my 210, no dash lights or tail lights, did you solve your problem?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.