travis06lly

Ok guys thanks, i saw the coilover brackets that beebani makes already. As far as the disc brakes i looked at the brackets and kits from a couple different places, would it be possible to run there brackets and use some 5x 4 3/4 corvette style discs

Ive just never really messed with the suspension that much other then lifts and lowering kits. What about the a-arms should those be swapped out in favor of some better heavier duty ones?

I'm pretty much asking what is the easiest swap to do, is there a car front end out there that's relatively easy to swap out?

I know this question has been asked a million times but i can't really find what I'm wanting to do. I have a 76 620 that I'm want to basically make a street/drag truck and put a boosted and built ls2 in it. The only thing that i haven't figured out yet is what i need to do with the front end to be able to support the power i want to put in the truck. I mostly see every one swap out front ends from another car or something along those lines into the trucks, i really don't want to source out the parts to do that since the junk yards here in south tx suck. So what should i do? Take it to a shop and just get them to build a front end for me with disk brakes and coil overs and all that? How is the chevy luv front end compared to the 620? Is that a swap i should consider? Im thinking about calling some shops and asking there opinion and getting some quotes.

I have a 76 620 that I put a Weber on, is it common to have to change the jets in one just to get the truck to run right? I'm not to carburetor savy as I've never had anything with a carb on it besides this here datsun lol,

What do you mean machining the hubs, grinding down the part that sticks out?

What do you mean machining the hubs, grinding down the part that sticks out?

I have some 18" titan wheels I want to get the center bore bored out so I don't have to use spacers! Can someone tell me the center bore size of the 620 please?

No tranny sorry

The stock carb? Yep still have it with fresh rebuild on it, havent used it since Im not sure what that is can you explain it please?

The metal pieces that the tail light lenses are in under the tail gate yes i got it

Im pretty sure it dont have mirrors on it man

I dont have the dash my anger got the best of me when i was trying to take it out, i have the actual metal part of the dash Thats under the pad. And yes i do have the wiper switch ill check if it has the 3 speeds like you want

O ok man thanks yea that does sound better there is a shipping place here in town but there kinda pricey

Well like the title states i got a 79 620 i bought for a parts truck im wanting to part out of sales as a whole. Its a single cab short bed, ive hot extra fenders, doors, stock steelies got a set of hub caps and beauty rims, i think im one short on the rings i pretty much have a full truck i need to get out of my storage. Just ask for what you want and ill tell u if i hot it or not can send pics after work. Im not sure on how i would ship the big stuff never done it before, what is the easiest and cheapest way of shipping bigger stuff?