Shy620

Since the slacker wont post pictures i took some and thought that you all might like them :ninja: Taking it for a test ride. :rofl: Put a fan in front of him so he could feel the wind in his beard A Little light welding. Cab getting finished up before the wasps make it a permament home. Here it is finally laid out with the front clip on but had to cut it off because he wanted to run a rack and pinion out of a "special car"

Ok so its the breather hose because I don't think the motor has a PCV valve since all the emissions has been removed. Thanks for the information and quick response.

So putting back together a 620 with a offenhouser intake and I am not sure where the hose shown in the picture goes. Any help would be totally awesome! Also on the other side of the block where the coolent would normally come from the heater core back into the block, if this is blocked off with a plug since there is no heater is there going to be any long term problems. Thanks Shy

PM Sent :w00t:

. oops.. wrong thread had too many open