oldgasman

Me big. Your such a douche bag. !

Well and matchbox dist. Or an el dizzy !

I thought I did say stock tach to a dizzy dist. Two wires off tach go to eng compartment 1- black with green 2- black with white

I have a stock tach. Trying to hook up to a dizzy There are two wires that come from tach to coil Black with green tracer and a black with white tracer .. And idea what goes to what ?

Datdave How many and how much to make this happenI would really like one.

I would love to get one of the dz push starts. Can u make more ?????

Ok I have the new 5 pin relay. How do I wire it to the 6 pin plug ???

On a stock guage what ohm sending unit does it take. It is for a 72 510

Does anyone have a solution to replace relay. With a non original as there are no originals out there. I have tested relay and it works on the bench. Could it be the high low switch ? Or even headlight switch ?

All lights come on if jumped.

Relay has been cleaned. Low beams work not all the time. Turn on highs all 4 go out.

Ok. But. All lights works but when you switch to high beam all headlights go out. But only headlights all others work. You can hear the relay switch over but all headlights go out. Is problem in the high low switch or the main light switch

Ok. Relay works. I think my problem is in the high beam switch do u know how it is wired does it ground system to turn on high or low ??

Anyone know how high beam switch on column grounds system. Relay good does not seem to be grounding at high beam switch ????