nad015

Ok, so just attach it to the thick battery wire that runs from the alternator to the battery. thats easy thanks

Hey I’ve put a new alternator into my 510. the one I took out which was internally regulated only had a main battery wire(big wire strait to battery) and an L wire to the lamp on the dash. the new one has the main batt wire and also L and S I just put the L back onto the old L wire but wondering what to do with the S wire, can I just hook it into any 12v ignition switched wire in the engine bay?

Cheers man, I’m going to buy one and see how I go. I was going to get an sr20 alternator and swap the pulley as I heard they fit. but these look better. $185 for a 110amp alternator with the right pulley. See how I go.

https://www.ebay.com.au/itm/290949986791?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=22on4tUnRUK&sssrc=2349624&ssuid=ricsXm2oTTu&var=&widget_ver=artemis&media=COPY is it this one you used? for a td42 GU patrol. already had the right v belt pulley on it. 110 amp see they also have a 150amp model aswel

Hey mate what did you have to do to get the GU patrol alternator in?

Are the kfvintage sills and inner rear quarters the same parts as futofab??

Hope not the rear main. That wouldn’t be fun doing that with the engine in the car

Where abouts is your oil leak? Sump? Or is it rear main seal?

Yeah pretty much what I did aswell. Makes a huge difference

Found yourself a gearbox I see! Nice. they’re pretty sloppy in the shifter. Make sure you replace the shifter bushings and nylon cup on the end if they’re worn. I actually made a short throw shifter when I had one of these boxes in my car. You have to make the end that goes into the gearbox longer, makes the shifter feel 100x better. I also think maddat sell a short throw shifter for these boxes. I ended up putting a 71c box in mine, basically the same as a 71b box I think, it just has the nicer shifter mechanism used in sr and cr boxes.

Oh roger!! makes it easier to understand cheers im so torn between getting a set of these. Or holding out for a set of ssr reverse mesh to pop up. I wish they still sold the reverse mesh new!!

That link won’t work

Also the struts I have are Datsun 810 or 200b in Australia

https://motivejapan.com/glow-star-wheels-ms-bc-15x7-4x114-3-4x100.html

Looking to get a set of these, I’m looking at at 15x7 for a 510 sedan. Thinking to get the +10 offset, it says +10 offset comes in either an A disk or an O disk. what would the difference be?