Jump to content


5t341tH

Member Since 22 Dec 2011
Offline Last Active Jun 19 2018 04:59 PM
-----

Topics I've Started

Ball joint coilover mount help

24 February 2018 - 03:57 PM

Hey all. Anyone here have pictures of where you cut and how you installed the upper coilover mount for ball joint trucks? I have one side mocked up and couldn’t see how it could possibly fit. The other side of mine is cut up and I don’t see how it would work as well. Can you guys give me some pointers here? Thanks
https://photos.app.g...eH2nUzYxziZPvj1

Help wiring intermittent wiper switch

05 February 2018 - 05:19 PM

Hello all. I just got the intermittent wiper switch and trying to install it. I wired it to my 78 and i can’t seem to get it to work intermittently. I did follow the how-to in that section. I powered the blue/red wire with always hot 12v. I can hear the relay box click when I have the switch in that position but the wipers don’t wipe. The wipers do work in the slow and fast setting. One thing I do notice though, when I make them wipe in slow or fast, the don’t return to the down position when I turn them off before the fully cycled. Any suggestions?

620 gauge cluster bulbs - super hot!

01 July 2017 - 11:08 PM

Hey guys I have a worrying issue I am having. I have LEDs in my gauge cluster for all the bulbs in there. Just wondering why the bulbs are super hot. So hot, that I can't even hold onto the bulb itself. Anyone else have this kinda issue? I have a 90amp alternator on my truck if it matters. The LED bulbs get so hot that they begin to fail. And these aren't cheap bulbs either. Any Ideas?