jack wagner

still have the drivers door? if so what kinda condition?

still looking

im in need of a drivers door for my 72 521, mine is literally destroyed and got ripped off my truck so hinges would be nice too. let me know. ill pay shipping to 17844 call or text 570-716-5410

ive got one, central pennsylvania

like title states i need a clutch/brake pedal for my 77 280z. let me know 5707165410 text if you like

Thanks guys I figured it out !! I had the wires on the cap going clockwise for some reason and not counterclockwise .

Haha . It just has a digital tach on it and you can advance and retard the timing it also . Yeah I can try putting the dual point and ballast back on and see if that helps

the mount came off a electronic dizzy off a 280zx (is this correct) the rotor is facing cylinder one on the cap when tdc. the car has no tach so im just goin by the timing light .it doesnt have any setting for 4/6/8 cylinders

im going by the tach on my timing light , i counted 42 links between the marks on the chain , the cam gear is set on number 3 to get the vee to line up to the mark on the head . compression is 160 in all cylinders

passenger side fender eybrow?

forsale is a hard to find e31 240z head that came off a low mileage motor . will need valve job done because it sat for years . asking $250

im in need of a driver side tailight cover for my 72 510 wagon. let me know if you got one thanks

ok im having an issue with my l16 . ever since i bought my 510 ive had an issue with it idling at like 1500 and if i turned down the idle it would just die. over the period ive owned it i installed a 32/36 (still idled high), then when installing an electronic dizzy and msd blaster 2 coil i noticed cylinder 1 had 0 compression and the rest were low, so then i installed a fresh a87 peanut head and custom ground cam . it runs now (still idles at 1500) and if i try to set my ignition timing it stalls at anything lower then 30 degrees ???? i rechecked my cam timing and im at a loss of what it could be . any thoughts on this would be great

im looking for a peanut head for my 72 goon . let me know what you have and hopefully we can work on a deal. it would need to be shipped most likely since im in pennsylvania , pm text or call 570-7one6-5four10 thanks jack

fender eyebrows for my 72?