bananahamuck Posted April 7, 2017 Report Share Posted April 7, 2017 not so sure about that ,, In 2007 you could get $270. per car dragged out of your yard with no title,,,, more than $350 for a titled one. By 2010 you couldn't give them away . Quote Link to comment
Eric flemming Posted April 8, 2017 Report Share Posted April 8, 2017 If you are referring to my remark Bananahamuck . The cars didn't go to the junk yard they went to the dealership then straight to the crusher. Putting a shortage of available car parts and a lot of junk yards out of business . We lost over half the junk yards here in Tucson! Because Obama's law that junkyards are not to have any cars older than ten years. I keep my eyes wide open to what was going on. Look at your statement and remember Obama took office in 2008. Quote Link to comment
KoHeartsGPA Posted April 10, 2017 Report Share Posted April 10, 2017 not so sure about that ,, In 2007 you could get $270. per car dragged out of your yard with no title,,,, more than $350 for a titled one. By 2010 you couldn't give them away . One of our local yards crushed almost a dozen of them right after that program kicked in......And they're still kicking themselves for it, they could have made 10x of what they got for them after crushing them..... Quote Link to comment
willz Posted April 10, 2017 Report Share Posted April 10, 2017 I just need to find a truck with the body mounts.... I took all the bolts out of mine and I think the two spacers under the radiator are from something else. All I have are the bushings between the cab and the frame..... any 620's down in Vancouver/portland? Quote Link to comment
KoHeartsGPA Posted April 10, 2017 Report Share Posted April 10, 2017 I just need to find a truck with the body mounts.... I took all the bolts out of mine and I think the two spacers under the radiator are from something else. All I have are the bushings between the cab and the frame..... any 620's down in Vancouver/portland? I've seen the whole kit on eBay for $40 new! 1 Quote Link to comment
willz Posted April 11, 2017 Report Share Posted April 11, 2017 I need the hardware Quote Link to comment
Mysta2 Posted April 11, 2017 Report Share Posted April 11, 2017 Went out to South End Auto Wrecking in Renton to pull some hubs from a 620 and found this: it's a 4WD with its' rear springs intact as far as I could see. this was on 4/10/17 1 Quote Link to comment
hobospyder Posted April 11, 2017 Report Share Posted April 11, 2017 Went out to South End Auto Wrecking in Renton to pull some hubs from a 620 and found this: it's a 4WD with its' rear springs intact as far as I could see. this was on 4/10/17 go back and get the springs please 1 Quote Link to comment
KoHeartsGPA Posted April 11, 2017 Report Share Posted April 11, 2017 I need the hardware Home Depot hardware section.... Quote Link to comment
thisismatt Posted April 11, 2017 Report Share Posted April 11, 2017 If you buy automotive hardware from Home Depot, you might be a... 1 Quote Link to comment
KoHeartsGPA Posted April 11, 2017 Report Share Posted April 11, 2017 Derp derp redneck :rofl: Quote Link to comment
Draker Posted April 11, 2017 Report Share Posted April 11, 2017 OEM hardware is so much nicer.. I always grab a pocket full when hitting the yard. 1 Quote Link to comment
KoHeartsGPA Posted April 11, 2017 Report Share Posted April 11, 2017 Ya Craig, that's why the rest of us have to get it at Home Depot!!! 1 Quote Link to comment
Mysta2 Posted April 12, 2017 Report Share Posted April 12, 2017 go back and get the springs please i was thinking of you when I came across it, you are welcome to them my friend. 1 Quote Link to comment
willz Posted April 12, 2017 Report Share Posted April 12, 2017 If I could find any 620's being parted out by me I'd go nuts..... But there aren't.... so I have to wait Because I'd rather get the oem hardware. But I've considered getting grade 8 stuffs in the interim 1 Quote Link to comment
hobospyder Posted April 12, 2017 Report Share Posted April 12, 2017 i was thinking of you when I came across it, you are welcome to them my friend. I have no chance to get that far south anytime before next weekend. My daughter would be upset with me if I disappeared Saturday as her mother will be spending easter with her Quote Link to comment
tdaaj Posted April 12, 2017 Report Share Posted April 12, 2017 If I could find any 620's being parted out by me I'd go nuts..... But there aren't.... so I have to wait Because I'd rather get the oem hardware. But I've considered getting grade 8 stuffs in the interim come up to Olympia some time 1 Quote Link to comment
Bleach Posted April 12, 2017 Report Share Posted April 12, 2017 If I could find any 620's being parted out by me I'd go nuts..... Not close enough? http://row52.com/Vehicle/Index/RNDuhrny6HAxx0shIeb7dRH6W 2 Quote Link to comment
gene knight Posted April 13, 2017 Report Share Posted April 13, 2017 Any B210 in the yards Quote Link to comment
KoHeartsGPA Posted April 13, 2017 Report Share Posted April 13, 2017 If I could find any 620's being parted out by me I'd go nuts..... But there aren't.... so I have to wait Because I'd rather get the oem hardware. But I've considered getting grade 8 stuffs in the interim What if I told you that you can get them from someone who posts in this thread.... PM HOGIE. Quote Link to comment
willz Posted April 13, 2017 Report Share Posted April 13, 2017 I already had HOGIE send me a bunch of stuff, I think we talked about them but I must have forgotten 1 Quote Link to comment
HOGIE Posted April 13, 2017 Report Share Posted April 13, 2017 willz what I said I could do for you is take pictures of correct placement and then send you the bolts when I get to scrapping out a truck. I have one that is almost to that point but not yet. 1 Quote Link to comment
Sierra Posted April 14, 2017 Report Share Posted April 14, 2017 1977 620 Pickup truck @ LKQ Pick Your Part Chula Vista (North) Quote Link to comment
willz Posted April 14, 2017 Report Share Posted April 14, 2017 I couldn't remember, my brain is fried. Just had our baby two nights ago, things have been crazy for the last few weeks Quote Link to comment
HOGIE Posted April 14, 2017 Report Share Posted April 14, 2017 I couldn't remember, my brain is fried. Just had our baby two nights ago, things have been crazy for the last few weeks Congratulations man. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.