Gas/brake pedals

[zrex]

Now that I’m driving my 620 more I need to do something with the pedal spacing. I have big feet size 14 xx wide.. the pedals are to close, i assume my only option is to pull the pedal box out and heat and bend pedals apart. I don’t have this problem in my 720 or my 240’s .. any suggestions ?

 

Rex

[datzenmike]

I guess bending them apart. Have a care, there is a hump in the floor left of the clutch for tire clearance. I guess you could hammer it down.

[distributorguy]

As long as you can pull the brake pedal far enough left so that you can get your foot on the brake or throttle without hitting both, then the clutch can stay where it is.  Ever think of just buying a more appropriate pair of driving shoes?  Boots or shoes with a wide sole are always going to be problematic for driving.   I used to use driving shoe sin my MG Magnette for the same reason, but later made the modification above - moved the brake pedal to the left - and it was resolved.  

[Charlie69]

Might be easier to have your foot narrowed!  LOL  This is one of the reasons I went automatic on my 520.  The brake pedal is where the clutch pedal was.  Please do not ask how I did this as I really do not remember.

[zrex]

Easy solution, I keep a running shoe that I haven’t worn for 15 years in the truck. I just change the one shoe when I’m driving. So much more comfortable and pleasurable driving without fighting the pedals..

[ducky]

i wear chucks and they work out well for me

[KELMO]

Same here, have 3 pair. Grey pair for the primer 1200 coupe, Green pair for the green 1200 coupe and a dirty black pair for the hell of it.