Jump to content


Photo
- - - - -

WTB late 210 5speed internal parts!


  • Please log in to reply
16 replies to this topic

#1 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 08 March 2018 - 03:34 PM

Anybody have a blown up damaged parts transmission for the LATE 79-81 210 standard H shift pattern 5speed (NOT the earlier dogleg 5speed) transmission?  We are in need of some of the little rectangular "detents" in between the inner & outer synchro slide hubs. Riley at Lynchburg Nissan called these detents "dogs", but they are NLA/NLS.  Each synchro slide hub will have 3 or 4 of these "detents".  There is a small ball bearing & spring "touching" each of these "detents", as they work with spring pressure & a "click".  We are willing to buy the slide hub assemblies so we have enough to replace what we need!  If we have to buy a complete blown up damaged transmission & have it shipped, so be it, but if you can disassemble it that saves you having to box up a whole tranny & saves us the higher shipping cost.  HELP!!!

 

TJ

Denver CO 



#2 datzenmike

datzenmike

    KING RAT

  • User Administrator
  • 72,503 posts
  • Location:Vancouver Island
  • Cars:'74 710 sedan, '76 710. prevoius... '78 620, '71 521, '68 510 new '76 B-210

Posted 08 March 2018 - 04:33 PM

There was an A 60 series for the '78.5 through '79 210 that had the dogleg pattern. The one wanted is from an '80 or newer 210 that has the H pattern.


Posted Image

#3 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 08 March 2018 - 04:47 PM

Correct Mike.............not the dogleg, but the later 5speed!  Riley cross referenced the various other Datsun application tranny detent part #'s, no luck......they are late 210 5speed ONLY!  Ugh!!

 

TJ



#4 datzenmike

datzenmike

    KING RAT

  • User Administrator
  • 72,503 posts
  • Location:Vancouver Island
  • Cars:'74 710 sedan, '76 710. prevoius... '78 620, '71 521, '68 510 new '76 B-210

Posted 08 March 2018 - 05:22 PM

Most of those ended up in Triumphs and MGs.

 

These or something like them???

 

ZYpjZet.jpg

 

32609-H9700?

 

 

Confirmed only on the 210 build dates Aug '79 and on ('80 model year)


Posted Image

#5 KELMO

KELMO

    Senior Member

  • Senior Member
  • PipPipPipPipPip
  • 2,186 posts
  • Location:Edgewood NM
  • Cars:71 Goon, 72 1200 coupe x 2, 69 F250 72 510 4DR Sedan 2003 Maxima 2014 Frontier 2012 Xterra

Posted 09 March 2018 - 05:37 AM

Damn, I have a 60 series 4 speed but that looks to have the same shift dogs as a 56 series 4 speed.


NISMO: Nissan Impresses Sluts More Often
"Well, primer gray IS a color..." (quote: Kelmo's wife)

#6 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 09 March 2018 - 08:52 AM

Fingers crossed A-series specialist SCCA racer Peter Zekert in MO says he has them, will know Sunday!

 

Yes Mike, those are the detents, and again, Riley cross referenced the part #'s...........they are 79-80 210 standard H shift pattern ONLY!  It's these silly little parts that go NLA/NLS that can stop a project in its tracks!  And people wonder why I try to keep & organize all of my 510 parts like I do!  I have saved our asses at work numerous times, cuz I have had something like this part for a 510 or a Z project in the shop!  I hope Monday morning will offer good news!!

 

TJ



#7 afracer

afracer

    Member

  • Members
  • PipPip
  • 71 posts
  • Location:Little Rock, AR
  • Cars:72 Datsun 1200, 69 Buick Sport Wagon, 90 Cressida, 92 240SX Conv, 93 240SX hatch, 96 GS300

Posted 13 March 2018 - 07:14 AM

If 32609-H9700 is the part number, I think I can get it brand new. You just need one? It'll take probably 2-3 weeks to get and won't be any less than $30 as it'd be coming from Japan.

#8 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 13 March 2018 - 02:35 PM

Hey afracer, thanks for chimming in!  I deal with Riley @ Lynchburg Nissan for all of our OEM needs, he said detents for this later 80-82 210 standard H shift pattern 5speed 1-2+5-R are that part #.....32609-H9700.  I will have to confirm with him exactly what his code 1-2+5-R means, but I think he means synchro hub 1-2 and then synchro hub 5-Reverse.......which I THINK means a total of qty 6 of part # -H9700.  If that is the case, then he also stated that the 3-4 synchro hub detents are part # 32609-M0102, which we would very possibly buy!  

 

Do you think you can get qty 6 of -H9700 & qty 3 of -M0102?  Since we might be digging deeper in Japan, the following part #'s are different thicknesses of a C-clip part # that we would also like to find..........32268-H7300, 32268-H7301 & 32268-H7302...........potentially qty 1 of EACH.  I will verify these part #'s in the meantime, but Riley has rarely steered me wrong!  Please let me know availability!

 

Yes, if you find these in Japan, we are willing to wait, but we would likely ask for some level of air freight to expedite!    

 

A-series specialist & racer Peter Zekert in MO had hoped he had some USED, but he did NOT, so we are back to square one. 

 

TJ

Ignite Performance

Arvada CO 



#9 afracer

afracer

    Member

  • Members
  • PipPip
  • 71 posts
  • Location:Little Rock, AR
  • Cars:72 Datsun 1200, 69 Buick Sport Wagon, 90 Cressida, 92 240SX Conv, 93 240SX hatch, 96 GS300

Posted 13 March 2018 - 06:07 PM

Replied via pm

#10 BillM

BillM

    Advanced Member

  • Members
  • PipPipPip
  • 128 posts
  • Location:Santee,Ca
  • Cars:'82 Datsun 210 wagon

Posted 19 March 2018 - 12:12 AM

I probably have several of those used parts,If you still need them.
Billm

#11 BillM

BillM

    Advanced Member

  • Members
  • PipPipPip
  • 128 posts
  • Location:Santee,Ca
  • Cars:'82 Datsun 210 wagon

Posted 19 March 2018 - 11:35 AM

I have about 15 of those but there is a slight difference in mine- my tops are slightly longer. I will email a photo of mine if you will give me your address, posting a photo here is too hard
Billm

#12 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 20 March 2018 - 12:35 PM

Hey Bill, thanks!  Afracer is currently working on acquiring NOS for me out of Japan, but we have not received final word on exactly what we will be able to get.  Once invoiced from supplier, I am happy!

 

Are your detents out of the late 210 5speed with the standard H shift pattern......not the dogleg??  Dealership ran all part #'s for me, these late 210 parts are specific.....ie NOT earlier dogleg, NOT Z ZX 5speed etc etc.  Sucks!  If yours are late 210, and you don't mind sending a couple pics, send to yenpit@hotmail.com.  If NOS out of Japan fails, and yours are correct, we would grab from you!  Thank you!

 

TJ 



#13 BillM

BillM

    Advanced Member

  • Members
  • PipPipPip
  • 128 posts
  • Location:Santee,Ca
  • Cars:'82 Datsun 210 wagon

Posted 20 March 2018 - 02:17 PM

Tj
I just emailed a photo to you of the parts. Tell me which type you want.
I could only find one spring, don't know where they all went
Bill

#14 BillM

BillM

    Advanced Member

  • Members
  • PipPipPip
  • 128 posts
  • Location:Santee,Ca
  • Cars:'82 Datsun 210 wagon

Posted 20 March 2018 - 02:20 PM

I have parts to regular,dogleg and 4speed all tossed into one box, don't remember which goes to what
Bill

#15 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 21 March 2018 - 08:13 AM

Great news!  As of this morning, afracer says that the NOS parts are ready to ship from Japan, so again, fingers crossed it all comes thru!  :thumbup:   

 

BillM, thanks, I will let you know if we need to dig further with your parts!

 

TJ



#16 yenpit

yenpit

    Senior Member

  • Senior Member
  • PipPipPipPip
  • 689 posts
  • Location:Denver Colorado
  • Cars:1972 510 4dr project, 2000 Impreza Outback

Posted 28 March 2018 - 01:22 PM

Thank you all for chiming in, but a HUGE thank you goes out to afracer for directly dealing with an NOS middleman service in Japan, getting us as many of the MUCH needed parts as he could!  This gearbox is goin' back together!!

 

TJ

Ignite Performance

Denver CO



#17 afracer

afracer

    Member

  • Members
  • PipPip
  • 71 posts
  • Location:Little Rock, AR
  • Cars:72 Datsun 1200, 69 Buick Sport Wagon, 90 Cressida, 92 240SX Conv, 93 240SX hatch, 96 GS300

Posted 29 March 2018 - 06:25 AM

Sweet!