joeytalent Posted February 14, 2018 Report Share Posted February 14, 2018 I've bit the bullet and ordered my valentine's day gift to myself, the OER ITBs for the L-series engine. However, I'm struggling to find any information about which injectors will fit - both OER and the site I ordered them from couldn't give me a definitive answer. Here's a close up - there's a fuel rail for each pair of inlets: If anyone can provide more information, I would appreciate it. I did an ITB build on my old Miata, and was able to just reuse the old injectors, but I doubt that's the situation here. Quote Link to comment
carterb Posted February 15, 2018 Report Share Posted February 15, 2018 Pretty! Why no L4 variant? : ( Quote Link to comment
G-Duax Posted February 15, 2018 Report Share Posted February 15, 2018 carterb, they fit any DCOE type manifold, so there is an L4 variant... Joey, I'm pretty sure they take the standard top-feed Denso injectors. 1 Quote Link to comment
flatcat19 Posted February 15, 2018 Report Share Posted February 15, 2018 carterb, they fit any DCOE type manifold, so there is an L4 variant... Joey, I'm pretty sure they take the standard top-feed Denso injectors. That. ^ Nippon Denso top feed fuel spitters. Quote Link to comment
joeytalent Posted February 15, 2018 Author Report Share Posted February 15, 2018 carterb, they fit any DCOE type manifold, so there is an L4 variant... Joey, I'm pretty sure they take the standard top-feed Denso injectors. That. ^ Nippon Denso top feed fuel spitters. Thanks for the replies! Forgive my ignorance, I've never had to look into different injector types before - if anyone has a link comparing the different types available, I'd like to read up on it. If anyone has any suggestions for a car to try and get them from, I'd appreciate it. I'm not looking to make huge power increases, I just love ITBs :thumbup: I'm probably going to go with RX8 injectors, just because they're readily available and the correct spec. Once the stuff arrives in March, I'll post up some more pictures. Quote Link to comment
carterb Posted February 15, 2018 Report Share Posted February 15, 2018 carterb, they fit any DCOE type manifold, so there is an L4 variant... Joey, I'm pretty sure they take the standard top-feed Denso injectors. Thanks. Odd that OER doesn't have a kit on the website though. Quote Link to comment
joeytalent Posted February 15, 2018 Author Report Share Posted February 15, 2018 Thanks. Odd that OER doesn't have a kit on the website though. Did you just look at the RHDJapan site? All the parts are available individually here: http://lupinusflower.ocnk.net/product/42 If you contact RHDJapan, I think they'd work something out for you if you just wanted the two bodies instead of four - as far as I can tell, they just order direct from the OER warehouse anyway to make up their kit. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.