BLUEBIRDSSS Posted February 13, 2018 Report Share Posted February 13, 2018 Hello I always had trouble getting the right offset on a Datsun 510. I found some nice +37 old school SSR Rims 4/5 lugs. But I was wondering if it will fit my Datsun wagon. Or can they be custom fitted with different struts? Thank you for your help Quote Link to comment
banzai510(hainz) Posted February 13, 2018 Report Share Posted February 13, 2018 forget them. front wheel drive type or you need huge spacers I got some SSR mesh brand new looking also but nobody has anymoney in washington to buy them and they fit stock 510 slamed down Quote Link to comment
Lockleaf Posted February 13, 2018 Report Share Posted February 13, 2018 You need to be closer to +10 or 0 depending on width and diameter. Quote Link to comment
paradime Posted February 13, 2018 Report Share Posted February 13, 2018 Hainz is right, +35 is a no go. My 510 is race lowered, I'm running 15X7 +20 Enkie rims, 205 40 tires on Troy Ermish coil overs and Wollwood brake hubs. I have no problems in the front. I know the wagon is straight axle so your rear width is not my barrio. I had to roll the inner lip and pound out the notch brace on the rear fender wells then 2X4 flared them about 3/4" to get 8" tires in there. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.