konig209 Posted January 4, 2018 Report Share Posted January 4, 2018 Is wiring a pain in the ass for you. Want to just have a harness done to the point where you wire in 5 wires and done. Well all the infor is in the pictures below itll have relays and fuses wired in easiest harness out there. I dont make the harness'theyre done by a local shop who i help getting the word out. Many done around the u.s. already. Also if you need your datsun fully rewired and youre near modesto ca. He can help. 5 Quote Link to comment
flatcat19 Posted January 4, 2018 Report Share Posted January 4, 2018 I just want a new 521 engine bay harness for an L. Maybe with some modern upgrades built in. Just saying. 1 Quote Link to comment
flatcat19 Posted January 4, 2018 Report Share Posted January 4, 2018 Oh...following as I think this will be a great DISCUSSION!!! Don't ruin it, people. 3 Quote Link to comment
konig209 Posted January 4, 2018 Author Report Share Posted January 4, 2018 I just want a new 521 engine bay harness for an L. Maybe with some modern upgrades built in. Just saying. I do that already just dont put it out there. I dont know if its just my truck or not but i strip and clean all the not needed shit super clean and simple. But the wiper motor only works in 1 speed and the heater blower dont work either. But then again idk if my heater blower and wiper motor are bad lol Also i removed my heater out of my truck 100% deleted haha 1 Quote Link to comment
flatcat19 Posted January 4, 2018 Report Share Posted January 4, 2018 I don't have the luxury of not needing a heater. Lol. Many 521 owners would benefit greatly from a modern, new harness. Whether it be dash, engine, or body- yadidimean? 1 Quote Link to comment
konig209 Posted January 4, 2018 Author Report Share Posted January 4, 2018 I updated my own to the best i could fully tucked 1 Quote Link to comment
tr8er Posted January 4, 2018 Report Share Posted January 4, 2018 This is the kind of thing I'd love to do but living where everything must be shipped makes it a bad business venture for sure. 1 Quote Link to comment
konig209 Posted January 4, 2018 Author Report Share Posted January 4, 2018 He has recieved and shipped many. Hawaii, tennessee, florida, texas, 1 week to week 1/2 turn around. 1 Quote Link to comment
datzenmike Posted January 4, 2018 Report Share Posted January 4, 2018 Right I Stoked I finally figured it out! I was wondering the best way to break in new piston rings and fresh bore.. also what oil is best to use?? I just want a new 521 engine bay harness for an L. Maybe with some modern upgrades built in. Just saying. Oh...following as I think this will be a great DISCUSSION!!! Don't ruin it, people. Agreed, discussion only. Otherwise contact directly. 1 Quote Link to comment
banzai510(hainz) Posted January 4, 2018 Report Share Posted January 4, 2018 looks just engine managment harness only< correct? for a KA/SR ect.. I thought there was a wiring shop. Wire specialties that does KA/SR harness already Its Not rewire a whole car truck or wagoon.Thats to much to do to get correct 1 Quote Link to comment
konig209 Posted January 4, 2018 Author Report Share Posted January 4, 2018 looks just engine managment harness only< correct? for a KA/SR ect.. I thought there was a wiring shop. Wire specialties that does KA/SR harness already Its Not rewire a whole car truck or wagoon.Thats to much to do to get correct Yes just engine harness. W.s. doesnt offer ka 1 Quote Link to comment
mhub91 Posted January 13, 2018 Report Share Posted January 13, 2018 Pricey to have zip ties.... :poke: 1 Quote Link to comment
Hondanx250 Posted January 14, 2018 Report Share Posted January 14, 2018 What are the wires that you are wiring in and what do they go too? 1 Quote Link to comment
konig209 Posted January 14, 2018 Author Report Share Posted January 14, 2018 Ground 12v constant 12v switched Fuel pump Starter injector prime Aftermarket temp sensor "optional" 1 Quote Link to comment
Farmer Posted January 31, 2018 Report Share Posted January 31, 2018 You send in your existing wire harness, he modifies then sends it back? 1 Quote Link to comment
konig209 Posted January 31, 2018 Author Report Share Posted January 31, 2018 You send in your existing wire harness, he modifies then sends it back?Yessir 2 Quote Link to comment
vdubbles24 Posted December 6, 2018 Report Share Posted December 6, 2018 On 1/4/2018 at 12:37 AM, konig209 said: Is wiring a pain in the ass for you. Want to just have a harness done to the point where you wire in 5 wires and done. Well all the infor is in the pictures below itll have relays and fuses wired in easiest harness out there. I dont make the harness'theyre done by a local shop who i help getting the word out. Many done around the u.s. already. Also if you need your datsun fully rewired and youre near modesto ca. He can help. Anymore info. I’m curious. I have a 1983 720 Z24 1 Quote Link to comment
konig209 Posted December 8, 2018 Author Report Share Posted December 8, 2018 Idk why the pics are gone ill upload em up again 1 Quote Link to comment
5t341tH Posted February 20, 2019 Report Share Posted February 20, 2019 What about S13 Sr20det for a 620? I'm looking to get the WS one but you can change my mind Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.