Kenmataya Posted August 1, 2017 Report Share Posted August 1, 2017 Hello all, Can anyone tell me whether 1.2L engine mounts will fit the 1.3L? Thanks all! Ken 1 Quote Link to comment
raceneely Posted August 5, 2017 Report Share Posted August 5, 2017 Ken They look identical to me I have cars with both engines. cant confirm except they look very close 1 Quote Link to comment
Kenmataya Posted August 5, 2017 Author Report Share Posted August 5, 2017 thanks, - i did some research, looks like the front mounts are the same, but the tranny mount is different. Ken 1 Quote Link to comment
Pedro Posted August 16, 2017 Report Share Posted August 16, 2017 I used J13 mounts on my J15. E1 through to J15 have the same front plate for bolting the mounts onto. Probably applies for J16-J20 as well but I haven't physically viewed any of them. The J15 comes with bolt holes in the block, so I'll be converting my 411 to engine mounts that bolt to the middle of the crossmember and block rather than the front cover. 1 Quote Link to comment
Kenmataya Posted August 20, 2017 Author Report Share Posted August 20, 2017 they're on the way - i hope they fit! Ken 1 Quote Link to comment
Kenmataya Posted August 31, 2017 Author Report Share Posted August 31, 2017 they are good! $93 for shipping from australia..... :sleep: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.