distributorguy Posted August 29, 2017 Report Share Posted August 29, 2017 Do you know if there was variation truck to truck, year to year? I'm guessing it took more than 1 set of tooling to make all those floor pans. Normally tooling like that gets repaired and updated annually, replaced every 5-6 years. I'd guess if you measured a '73 then a '79, they may be significantly different - like most every other part on the truck. 1 Quote Link to comment
sebpv Posted August 29, 2017 Author Report Share Posted August 29, 2017 I cant say for the floors, but you can bet the seat belt mounts are designed differently I salvaged one out of a 76 only to find out its out of whack. 2 Quote Link to comment
sebpv Posted August 29, 2017 Author Report Share Posted August 29, 2017 oh and the drip rail along "third brake light" has a slightly different curvature. I could only notice from the ends where i cut and welded. 1 Quote Link to comment
Farmer Posted August 29, 2017 Report Share Posted August 29, 2017 I just measure my 74, my 77, my 78. Depth was the same and the dimple varied little in shape. 2 Quote Link to comment
sebpv Posted August 29, 2017 Author Report Share Posted August 29, 2017 Thx Farmer Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.