Jump to content

72 510 wagon diff plugs


Recommended Posts

So I managed to round out both the fill and drain plugs on my diff. Welded up some nuts on it to remove them, but now would like to put in new plugs.

 

Is there an interchange on these plugs, or possibly a part number out there? Searched the web but couldn't come up with anything.

 

Thanks!

Taiki

Link to comment
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

 OK the drain has a magnet on it to collect ferrous filings. It was used on ALL Datsuns from mid 60s (some to '62) till '80/'81. #32103-14600

 

I can't find the 510 goon part number but have no reason to believe that any H-190 fill plug won't work.

#43059-A1600.

 

The diff fill and drain plugs interchange. I run a drain plug as a fill plug because of the magnet on it.

 

Diff fill or drain plugs are removed by placing the square end of a 1/2" ratchet or breaker bar into them. Most 71B 4 and 5 speeds are the same but some have an outward square boss for an open end wrench or pipe wrench. I have used transmission bungs on the diff... same thread.

Link to comment

From the sedan rear end, the drain plug is the same # as the Goon so it would stand to reason the filler would be the same.

00931-21200 with a description of " plug taper thread".

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.