one clynder not firing? ck the valve lash. crack in valve or valve seat. maybe piston but that be obvious when you put it together
610 goon boso\rat build
Posted 10 October 2017 - 05:55 AM
Posted 20 December 2017 - 04:52 PM
Alight some update. Cars runnin good, used a gas analyzer at school to really tune it in. Been dailying it for a little while.
$360 of head work :/
Boso styling taking shape, oil cooler and painted a lens to make a "fog" light.
All new steering components feel so good
Was definitely time for some new parts haha
- ]2eDeYe likes this
Posted 23 December 2017 - 09:09 AM
Posted 30 December 2017 - 12:16 PM
I used Crown Suspension Universal 3" Rear Lowering Block from eBay. Dont recommend it or doing what I did. The dimple on the block that went into the hole in the leaf was too small. I had to hog out the center of the block, stuck in a large bolt, an then rounded it out to the size of the hole on the leaf. If that makes any sense.
If you have a 610 your going to have to cut at least half the bumpstop out. Stiffer shocks would help too.
Posted 30 December 2017 - 08:48 PM
Posted 13 March 2018 - 10:23 PM
question with the 280zx trans did it fix through the same shift hole as before or did you have to cut a new hole?