Jump to content

*Giveaway* - KA521 Motor Mounts


]2eDeYe

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I have a 1966 USA 520 that had the J13 in it.  I cut the J13 mounts of of the frame and welded in 1980 720 L motor mounts, then I install a 1980 chassis in my 66 520.

 

I still have the 66 chassis I modded for the L motor so please put my name in the number generator Redeye.

  • Like 2
Link to comment

No chicken trades... only give away :lol:
 

 

Ive had 3 different mount setups for ka in 521. Interested how these fit

 

 

I basically positioned the motor relative to the stock KA mounts and the Stock L series mount position and then adjusted the height for clearance. The transmission mount sets the transmission as closed to centered between the floor and the crossmember as I could get it. Of course this is with the shorter 720/D21 5 speed. Still working on the longer 240 mount with a couple guys, as I didn't have one to modify (cut the casting stuff off).  

  • Like 1
Link to comment

No chicken trades... only give away :lol:

 

 

 

 

I basically positioned the motor relative to the stock KA mounts and the Stock L series mount position and then adjusted the height for clearance. The transmission mount sets the transmission as closed to centered between the floor and the crossmember as I could get it. Of course this is with the shorter 720/D21 5 speed. Still working on the longer 240 mount with a couple guys, as I didn't have one to modify (cut the casting stuff off).

As long as everything clears and the oil pan sits flat/level, its good

  • Like 1
Link to comment

If only this were for 620 SR20 mounts, that timing would be good. Though I'm willing to pay for them when you have them ready! :)

 

 

Still waiting to hear back from test fitting before I do a run of them. :)

  • Like 2
Link to comment

Still waiting to hear back from test fitting before I do a run of them. :)

 

Sounds good! I probably have a few weeks until I change lanes back to that project. Right now I'm preparing to swap a 1.6 16Valve into my Samurai. Fortunately, a number of companies offer various mounts for that swap. 

  • Like 2
Link to comment

Love that truck Carlos :cool:

 

 

 

 

Can never have enough Datsuns :lol:

true 

i am doing ok i have a 68 510 2 door KOOL BLUE 

68 roadster MARVIN 

and a 72 1200 coupe CINDY 

i keep trying to keep a z but it never works out 

I have had 2 620,s and 2 521 sold both before fixing them up 

when i was younger I had a 69 2 door 510 

then a 72 2 door 510 painted nice then totaled 

and a 72 2 door 510 never finished fixing up and sold it 

then a white 72 2 door 510 auto sold after i bought blue 

maybe someday I will keep more  

:thumbup:  :thumbup:  :thumbup:

  • Like 2
Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.