Jump to content

Dellortos dhla linkage


DatMo

Recommended Posts

So I've handed off a complete cannon linkage set to my mechanic to get my linkage going but he says I'm missing the idle adjustment which I figured was the rod threads on the sides. With that being said, does anyone know what I'm missing and where I could possibly get them? Here's what's currently on the car.

I handed him everything that's on there ATM.

 

Need asap.

 

C09AC77B-45E8-472C-AD34-8F6E14C0CA75_zps

Link to comment
  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Yeah, the idle speed adjustment is part of the carbs.

Find a new mechanic.

 

See item 'a':

 

dhlaadjustment2.gif

I actually don't have that piece. Thank you so much! That piece was not included in the cannon setup. Know where I could get that potentially or what it's called?

 

My linkage has nothing like those smaller side piece that's attached.

 

Edit. I've also found some online linkage but I think it still wouldn't work due to the fact that it's facing the front end of the car when it's mounted. I'm also not sure if the cable it comes with would be long enough. I find it more suitable to just find those levers.

 

http://www.ebay.com/itm/like/291933275908?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D164965185820_324272%2526itemid%253D291933275908%2526targetid%253D271413297030%2526rpc%253D0.12%2526rpc_upld_id%253D113136%2526device%253Dm%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fulk%25252Fitm%25252Flike%25252F291933275908%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526googleloc%253D9031026%2526poi%253D%2526campaignid%253D714751104%2526adgroupid%253D42866488452%2526rlsatarget%253Daud-281204642876%253Apla-271413297030%2526gclid%253DCjwKEAjwh9PGBRCfso2n3ODgvUcSJAAhpW5oPki1LYgKOPEk9nmJw3rnEYiKKEaUKhpbCp-P0Y_3WxoCtkfw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1189109701921&ul_noapp=true

Link to comment

Yes I've googled many times and even emailed eurocarb which is your third link but none of them have that arm that's pictured. I'm waiting back on responses.

Link to comment

I googled "dellorto dhla parts" and found a few sources.

 

http://www.carburetion.com/Dellorto/DellortoDHLAParts.asp

 

http://www.dellortoshop.com/contents/en-us/d2_Dellorto_DHLA_Carburetor_Parts.html

 

https://www.cbperformance.com/category-s/130.htm

 

I would seriously look into a center pull style linkage though. They are much easier to keep in tune and the danger of twisting a throttle shaft is greatly diminished. This page shows center pull on DHLA carbs - https://toyotaminis.com/forum/threads/sidedrafts-20r-intake-dellorto-40s.6175/

 

Any mechanic that is willing to think outside the box to make something happen will be able to get it working. Simply telling you that you're missing parts... I too would look for another mechanic.

Link to comment

With that being said, I found this kit online which would be best.

I've read multiple times that dellortos and webers are very similar so I'm thinking this would work for my situation and it's $109 complete which isn't bad.

 

Once again, thanks for the input.

 

http://www.lceperformance.com/Center-Pull-Throttle-Linkage-Kit-Sidedraft-Carbs-p/1035023.htm

  • Like 1
Link to comment

European auto on Prarie st. here in La has everything for doritos.

I do need a choke. A little late since I already purchased the center pull but that sounds great. I'll have to find the address and go there to get a choke for sure.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.