wayno Posted February 18, 2017 Report Share Posted February 18, 2017 Well something is bent, as it is not aligning, unless you are talking about it just not closing. Does it close all the way when you push it with your finger, or is that metal to metal holding it open because the door is not over the hole it is supposed to fit? It sounds like everyone else thinks the cable is not adjusted correctly, to me the door looks set to far towards the firewall therefore not aligning with the hole. 1 Quote Link to comment
datzenmike Posted February 18, 2017 Report Share Posted February 18, 2017 I'm taking into account lens aberration wayno. :lol: Looks slightly off to the left side but :confused: Maybe a little sticky foam on the door? 1 Quote Link to comment
jesusno2 Posted February 18, 2017 Author Report Share Posted February 18, 2017 I think it is in the hinge itself i can see where it is deformed a little 1 Quote Link to comment
jesusno2 Posted February 19, 2017 Author Report Share Posted February 19, 2017 Fixed the flapper door do any of you guys know if the 521 heater box grommets are avaliable? 1 Quote Link to comment
HOGIE Posted February 19, 2017 Report Share Posted February 19, 2017 How did you fix the trap door? Drill out spot welds and relocate? What is this grommet you speak of? Grommet to what? The firewall? Back of the box? Front of the box? 1 Quote Link to comment
thisismatt Posted February 19, 2017 Report Share Posted February 19, 2017 If you mean the molded rubber boot on the front, then no. 1 Quote Link to comment
jesusno2 Posted February 20, 2017 Author Report Share Posted February 20, 2017 I fixed the hinge with a block of wood and a hammer. The grommets im talking about are the ones for the heater core itself they are a funky size i think i can find one to work for the wires for the motor itself 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.