Jayroc Posted February 9, 2017 Report Share Posted February 9, 2017 Hey guys and gals. Here my new project I picked up this fall. Finally got around to starting a build page. Nothing to report work wise but I'll give you some back story, and yes pictures. So before I joined the military I got my hands on a 73 620. Military wouldn't ship it when I got posted so, I sold it. My time has ended with the military so I found myself a new one. I bought it just north of Edmonton, Alberta. I was going back to school out there. I had it shipped back to my house in just north of Ottawa, Ontario. Since it been here I haven't worked on it. Just cleaning and inspecting so far. Here are the pictures from the day I bought it, and loading it into the truck for the trip home. 3 Quote Link to comment
sebpv Posted February 9, 2017 Report Share Posted February 9, 2017 Your story sounds similar to mine. I got mine in Calgary, lived in Cold Lake and trailered it to Quebec. But Im still in the military haha. The project or perhaps I should say I am taking forever to go forward. I had a red and an orange long bed that i had to part with since they were old beat up projects and didnt have the money or.room to move them. Potential money I will never see... Btw nice to hear about another folk in Canada 1 Quote Link to comment
Hrvat9 Posted February 10, 2017 Report Share Posted February 10, 2017 We should definitely meet up! I'd drive up from Toronto to Ottawa to hang with some datsuns 1 Quote Link to comment
sebpv Posted February 11, 2017 Report Share Posted February 11, 2017 Well give me a decade to finish the restoration and I might take your word for it hahaha....*sigh* 2 Quote Link to comment
]2eDeYe Posted February 13, 2017 Report Share Posted February 13, 2017 Dig that Sportruck sticker. :cool: Nice start for a build. 1 Quote Link to comment
sebpv Posted February 13, 2017 Report Share Posted February 13, 2017 Damn we need someone to get in on the duplicating of the Sportruck sticker... 1 Quote Link to comment
sebpv Posted February 13, 2017 Report Share Posted February 13, 2017 just found this actually: https://dribbble.com/shots/1848360-Datsun-Sportruck-Hood-Graphics 2 Quote Link to comment
Jayroc Posted February 13, 2017 Author Report Share Posted February 13, 2017 I'm going to try and copy it before I paint her 1 Quote Link to comment
Jayroc Posted February 21, 2017 Author Report Share Posted February 21, 2017 So had a chance to work on it today. Had it running and it didn't sound quite right. Adjusted the valves but my #1 intake doesn't seem right 1 Quote Link to comment
Jayroc Posted February 21, 2017 Author Report Share Posted February 21, 2017 The adjustment bolt it backed way off on the number 1 intake. It's set at 0.008 cold. Don't want to run it yet just I have a valve issue. 1 Quote Link to comment
Jayroc Posted February 23, 2017 Author Report Share Posted February 23, 2017 So after some advice from the engine fourm. I rechecked for my lash pad and found it down by one of the head bolts. Got that reinstalled and adjusted. No damage to the cam or rocker. Then stripped off the old intake and exhaust. To my surprise all the bolts came out with a fight, or me breaking any. So I installed an early intake. not sure of year or what it came from. The 76 has that combined intake exhaust. What a mess that thing is. Had a set of headers I picked up a while back. Don't fit I think I was off a 510. I did happen to have a solid cast exhaust manifold though. So that's bolted up, need to make a collector for that now though. Got my weber swapped in and running kind of. Need to find the throttle linkage assembly. Hope it's one of the box of parts. 1 Quote Link to comment
Jayroc Posted February 27, 2017 Author Report Share Posted February 27, 2017 So the weber I have never came with the throttle bracket. Didn't feel like paying 50$, shipping to Canada it's stupid. Made this one today, need to move the mount over to the left. It doesn't line up quite right. It's a little heavy duty but it's what I had in the shop. Tuned up the weber and had it running with the new setup. It's just off the header so it's a little loud. https://youtu.be/oRENHUaKSBY 1 Quote Link to comment
Lockleaf Posted February 27, 2017 Report Share Posted February 27, 2017 I did basically the exact same thing on my Weber. Very nice. 1 Quote Link to comment
Jayroc Posted June 11, 2017 Author Report Share Posted June 11, 2017 So I'm horrible at updating this. Pulled the dash to clean the mouse shit and piss. Plus got a tach to install so that wasn't all bad. 1 Quote Link to comment
Jayroc Posted June 11, 2017 Author Report Share Posted June 11, 2017 Next project was the gas tank. It's been sitting since 83. So I dropped it only managed to snap 3 of the 6 bolts holding it up. Front right side looked like it was hit with bird shot for 5 feet out. So took it down to my rad guy to see if he could save it. Month later got it back all bronzed up and cleaned out. Fresh coat of paint and she's good to go back in. Quote Link to comment
Jayroc Posted June 11, 2017 Author Report Share Posted June 11, 2017 This weeks on going project has been the rust. When I bought it, I knew it had some soft spots in the floor. Being in canada I couldn't be to picky. Not many left up here. Not sure what happened to my before picture. Oh well you get the point she was really soft. Even got into the cab corner. So a little more cutting and grinding and we have the first patch. 1 Quote Link to comment
Jayroc Posted June 11, 2017 Author Report Share Posted June 11, 2017 Also threw on my new fenders to see how they fit. Drivers side isn't to bad, but the passenger side is going to be a crap load of work to make it fit. I don't have the originals to use, so suck with these ones. No pictures of this job yet 1 Quote Link to comment
sebpv Posted June 12, 2017 Report Share Posted June 12, 2017 i see we had the same ideas plan is to get metal dyes to punch the mounts recesses 1 Quote Link to comment
Jayroc Posted June 12, 2017 Author Report Share Posted June 12, 2017 At least you have the luxury of a pulled cab. Just don't have the space to that yet. I was thinking about a dimple die as well. Going to try a wild idea first. I'll post it up if it goes well. Thanks Germs 1 Quote Link to comment
sebpv Posted June 12, 2017 Report Share Posted June 12, 2017 dont use wood. I use 18 gauge metal and the sheet digs bad into the wood 1 Quote Link to comment
Charlie69 Posted June 12, 2017 Report Share Posted June 12, 2017 Got my weber swapped in and running kind of. Need to find the throttle linkage assembly. Hope it's one of the box of parts. Use the throttle linkage bracket off of your stock carb on the Weber. Do not over tighten the throttle shaft nut. Quote Link to comment
sebpv Posted June 12, 2017 Report Share Posted June 12, 2017 Jayroc, do you have any intact/unmolested mount recess? Im dealing with a buddy to fab punch dyes 1 Quote Link to comment
Jayroc Posted June 12, 2017 Author Report Share Posted June 12, 2017 Charlie that's what I ended up doing. Sebpv I don't, the two that I cut out were really rough shape. The passenger side is good so I'm not cutting them out. 1 Quote Link to comment
sebpv Posted June 12, 2017 Report Share Posted June 12, 2017 So what does thqt say about the passenger recessed holes? Are they stock or repaired? If stock ill take the diameter of the washer, of the recess and perhaps the depth if you can. Pretty please! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.