d21 guy Posted November 21, 2016 Report Share Posted November 21, 2016 Ok you guys so I have a huge issue I just ran into. So I have a d21/ 1990-1995 pathfinder. I did the manual swap on it but not sure on what to do with the wiring. I'm stuck. I've heard that the wires are black and brown and then I've heard that they are. Red, yellow/black, white, white/black. So I guess my issue is which wires are they and what do I do to the wires when I find them to by pads the nutreal safety switch 1 Quote Link to comment
datzenmike Posted November 21, 2016 Report Share Posted November 21, 2016 Welcome to Ratsun. One pair will be the reverse lamps switch.... White/Black stripe and Red/Black stripe Quote Link to comment
lonwlf Posted November 24, 2016 Report Share Posted November 24, 2016 The plug with larger wires just behind the power steering res.Take the black and light brown and connect them together.There are several other plugs right there with much smaller wire but theses all went to your auto tranny. 1 Quote Link to comment
datzenmike Posted November 25, 2016 Report Share Posted November 25, 2016 Right! Forgot the auto will have an interlock so it can only be started in the NEUTRAL and PARK positions. That needs to be permanently ON for a standard. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.