Jump to content

ka24de Ls coil pack conversion information


bluebird4200

Recommended Posts

Hi Everyone,

 

Just wondering if anyone knows or is there and build threads that discuss converting the distributor in to using coil packs. I have a s14 Ka24de that I am currently setting up a turbo on. I would like to possibly convert it to use coil packs rather than running a weak spark from the distributor. Is there any info out there? Please help me. Thank you! 20160916_162250_zpsoryjory8.jpg

Link to comment
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Running any of the aftermarket coils is all the same really. Power, ground, signal from ecu. I'm fairly confident you will not be able to do this on a stock ecu, and don't think nistune will allow for it either. If you want coil on/near plug you should really look into any number of the stand alone options available. Side note, with the power you're likely to get out of what I'm guessing is an old stock nissan garrett the stock dizzy will be fine. As I recall the dizzy is good well into the 400whp range, so don't go changing if all your concerned about is it working.

 

+1 on build thread.

You'll also want to move the hoses on the intake pipe that are just before the throttle body to before the turbo or installing check valves in them.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.