tdskip Posted September 29, 2016 Report Share Posted September 29, 2016 Thanks in advance for the help - total newbie here. I am doing a SR20DE S14 swap and am not sure what US car these parts cross-reference too, I checked a mid '90's 240sx replacement part on Rock Auto but it doesn't look quite right. Here is the engine / transmission. Thanks! Quote Link to comment
datzenmike Posted September 29, 2016 Report Share Posted September 29, 2016 Looks like a 71C 5 speed so just about any 240sx slave should be the same. 30620-69F06 '96- Nabco 3/4" for S14 1 Quote Link to comment
tdskip Posted September 29, 2016 Author Report Share Posted September 29, 2016 Thank you for the super fast response. I have to say this forum is just fantastic, thanks for all of the help. Quote Link to comment
datzenmike Posted September 29, 2016 Report Share Posted September 29, 2016 As long as you realize this is just a close guess. It's a similar transmission, engine and year. I have a picture and it looks the same. They also came in 11/16" for the earlier KA24E engine but went with the larger later one. About $50 Quote Link to comment
tdskip Posted September 29, 2016 Author Report Share Posted September 29, 2016 Close guess is a lot closer than where I started this morning, understand the caveat. Thanks! Quote Link to comment
datzenmike Posted September 29, 2016 Report Share Posted September 29, 2016 Well then.... welcome to Ratsun. Quote Link to comment
flatcat19 Posted September 29, 2016 Report Share Posted September 29, 2016 Apparently it's for an SR20... I wonder if a slave from a FWD SR20(Sentra/Infiniti G20) would work. EDIT: Bleeder for FWD slave is probably in the wrong position. Still could work though if bolt fitment is proper. Quote Link to comment
tdskip Posted September 29, 2016 Author Report Share Posted September 29, 2016 Thanks. Bleeder need to be on the top or it won't bleed properly, right? EDIT - I found this reference; FS5W71C - The 71C has a different shifter than the 71B and all versions are longer than the 71B. A 71B front housing can be swapped. NORTH AMERICA1983- Nissan 300ZX (non-turbo, turbo uses 90-series)1986-1989 Nissan D21 (Hardbody) with Z-series engine1989- Nissan D21 (Hardbody) with KA-series enginePathfinder/Xterra/Frontier with KA-series enginesPathfinder/Xterra/Frontier with VG-series (V6) engines Quote Link to comment
tdskip Posted September 29, 2016 Author Report Share Posted September 29, 2016 Bingo - looks like we have a winner. The cross refrence ablve didn't really help, but I found this at Rock Auto EXEDY SC563 / CENTRIC 13942002 NISSAN 1993 240SX 2.4L L4 Transmission-Manual Clutch Slave Cylinder Quote Link to comment
flatcat19 Posted September 29, 2016 Report Share Posted September 29, 2016 Word to the wise...centric stuff is money. I like their parts. Quote Link to comment
tdskip Posted September 29, 2016 Author Report Share Posted September 29, 2016 Thanks, will order that brand. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.