Jump to content

Quick help needed..


ltd999

Recommended Posts

Hey,

 

I had to replace the head gasket on my 120y, so I brought a gasket, just the graphite ones.

 

Just about to work on it, but saw it has a little oring that I have to fit. I looked it up and it sais to fit it on the block.

 

But there is no where it can go? I know it fits into block as seen here http://datsun1200.com/modules/myalbum/photo.php?lid=24735

 

But all the holes are too big...and the only other one is just an indent next to the thinner bolt hole.

 

Any help would be great

 

Thanks

Link to comment
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Cool thanks for that. I'm put it on anyway because I think it might be for other models, and the hole its meant to go in is filled in.

 

Having another problem now of it not starting. Sounds like there is no life it's just turning over.

 

Spark plugs are in, heads tight, rocker gear is tight. But I did use rocker gear off the second hand head that I put on it, maybe they need adjusting.

Link to comment

Cool thanks for that. I'm put it on anyway because I think it might be for other models, and the hole its meant to go in is filled in.

 

Having another problem now of it not starting. Sounds like there is no life it's just turning over.

 

Spark plugs are in, heads tight, rocker gear is tight. But I did use rocker gear off the second hand head that I put on it, maybe they need adjusting.

 

Did you adjust valve lash with a feeler gauge?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.