going electronic distributor

[Jo Waldner]

racerx sorry my english is not so good,

 

what do you mean with u had bitchen time trying to adjust dual points???

[distributorguy]

Twice as much opportunity to screw it up.   :thumbup:

[racerx]

Much easier to adjust single point.

[Jo Waldner]

puhh in my oppinion a dizzy always has just one point !?

[racerx]

My 71 datsun 510 datsun had dual points

[Doctor510]

STANDARD MOTOR PRODUCTS DG67 Intermotor; For Hitachi Distributor;Material: Bronze Info

w/ 0.627 Inch Straight Bore Bushing; Hitachi Distributor

 

 

 

Out of Stock

 

 

STANDARD MOTOR PRODUCTS DG68 Intermotor; For Hitachi Distributor;Material: Bronze Info

w/ 0.6299 Inch Bore Top Hat Bushing; Hitachi Distributor

 

 

 

 

May not be available, check eBay there is a company that makes them.

 

 

[distributorguy]

They're pretty much never available.  

[difrangia]

A local machine shop or even a competent individual with a bench lathe could replace the bushings. Best use Oilite material that is bronze impregnated with lubricant (Molybdenum maybe).

 

Steve

[distributorguy]

Yep, 841 spec bronze or similar.  Not a 600-series, which is far more common and has very little oiling capability.  

[Jo Waldner]

that sounds like real mechanics!!

cant work further on dizzy at the moment cause my kids always ask for a drive with the currywurst! 620 single cab long bed in red!

You know what a german currywurst is?

[distributorguy]

Delicious!

[difrangia]

Our '78 red longbed.

 

Very obscene viewed from this perspective.

 

Steve

 

[Jo Waldner]

niceiLike the big mirrors and the white wallis!am not good in working with computers so i have my problems with posting photos etc! but i will work on it :)i ask my wife tomorrow

[datsun6201972]

Thank you guys, you guys are awesome. Any suggestion where I can get OE points, condensor,coils or electronic Dist. I get little confuse with some many out there.

[datzenmike]

Points and condenser at any auto supply store, even if they have to order them. Coils do not need replacing. Never replace stuff that works, the original is better quality that the replacement.

 

 

There are two EI (electronic Ignition) distributors.

 

One, is the Remote Igniter (used on '78 Datsuns with L series 4 cylinder engines) needs a remote box, usually located under the dash to make it work. A new one won't work without it, but if you find one in a vehicle get the box.

 

The other is the EI Matchbox (electronic Ignition) distributors and is simply the remote box miniaturized and mounted on the side. It can be bought from some auto supply but they are not original parts. They should work ok for as long as you own it.

 

Alternatively you can look for an L series EI matchbox on any '79 or '80 Datsun that has an L series engine.

 

 

ALWAYS get a matching EI coil to go with it. If buying ask for a '78-'79 S10 200sx. This will do.